topic Re: Server OS requirements in Operating System - HP-UX

Server OS requirements

giriplug — Sun, 19 Feb 2006 23:49:58 GMT

Hi guys,

Just would like to know where to get information or documents relating servers min and max os requirements?For eg.
what is the min and max OS requirement for an n class or k class?

thx in advance...

Re: Server OS requirements

Arunvijai_4 — Sun, 19 Feb 2006 23:56:43 GMT

Hello,

One way of finding out is, Go to http://docs.hp.com and look for the installation guide for the specific OS, it has a section called "Supported servers", for example,

http://docs.hp.com/en/5991-2701/ch02s03.html

This is for 11iV2 Dec'05.

-Arun

Re: Server OS requirements

Senthil Kumar .A_1 — Sun, 19 Feb 2006 23:57:59 GMT

Hi Nelanraj,

Please find some loads of info below.

http://docs.hp.com/en/hw.html

HP has nearly stopped naming the servers in term's of classes. Nowadays its all about "RPxxxx" for Pa- risc based systems and "RXxxxx" for Itanium processor based systems.

I would also strongly recommend going through the following site as well for cross reference.

http://www.openpa.net/

Rehards,
Senthil Kumar .A

Re: Server OS requirements

Steve Steel — Mon, 20 Feb 2006 07:34:38 GMT

Hi

http://www.hp.com/products1/servers/HP9000_family_overview.html

It may be in discontinued but it should be there

Steve Steel

Re: Server OS requirements

giriplug — Mon, 27 Feb 2006 02:55:16 GMT

hi guys ...

just a quick one...can N class support 10.20 and will there be any problem if 10.20 being installed on a n4000/rp7400???

thx