Ignite image

Simon Wickham_6 — Wed, 22 Feb 2006 07:30:22 GMT

Hi ,

I have installed Ignite -UX and gone through the server configuration which I do not have DHCP configured but have the boot ip addresses and have created a depot from CD as prompted.

Then once this has been completed I have created a network archive of a client I wish to use for cloning onto multiple boxes. When I look at my current INDEX file I see the following.

# /var/opt/ignite/INDEX
# This file is used to define the Ignite-UX configurations
# and to define which config files are associated with each
# configuration. See the ignite(5), instl_adm(4), and
# manage_index(1M) man pages for details.
#
# NOTE: The manage_index command is used to maintain this file.
# Comments, logic expressions and formatting changes are not
# preserved by manage_index.
#
# WARNING: User comments (lines beginning with '#' ), and any user
# formatting in the body of this file are _not_ preserved
# when the version of Ignite-UX is updated.
#
cfg "HP-UX B.11.11 Default" {
description "This selection supplies the default system configuration that HP supplies for the B.11.11 release."
"/opt/ignite/data/Rel_B.11.11/config"
"/opt/ignite/data/Rel_B.11.11/hw_patches_cfg"
"/var/opt/ignite/data/Rel_B.11.11/core_cfg"
"/var/opt/ignite/config.local"
}

And under clients I see the following :

azur:root# cd ./clients/
azur:root# ll
total 4
drwxr-xr-x 3 bin bin 2048 Feb 21 16:52 0x00306E0C2AFD
lrwxr-xr-x 1 bin bin 14 Feb 21 16:41 maiden -> 0x00306E0C2AFD

azur:root# cd 0x00306E0C2AFD/
azur:root# ll
total 36
-rw-r--r-- 1 bin bin 789 Feb 21 16:52 CINDEX
-rw-r--r-- 1 bin bin 5 Feb 21 16:40 client_name
-rw-r--r-- 1 bin bin 28 Feb 21 16:40 client_status
-rw-r--r-- 1 bin bin 296 Feb 21 16:40 config.sys
-rw-r--r-- 1 bin bin 406 Feb 21 16:40 host.info
-rw-r--r-- 1 bin bin 659 Feb 21 16:40 hw.info
-rw-r--r-- 1 bin bin 139 Feb 21 16:40 install.log
-rw-r--r-- 1 bin bin 0 Feb 21 16:41 lockfile
drwxr-xr-x 3 bin bin 2048 Feb 21 16:41 recovery
-rw-r--r-- 1 bin bin 107 Feb 22 12:09 server.state

If I run the command /opt/ignite/bin/instl_adm -T all appears ok :

azur:root# /opt/ignite/bin/instl_adm -T
* Checking file: /opt/ignite/data/Rel_B.11.11/config
* Checking file: /opt/ignite/data/Rel_B.11.11/hw_patches_cfg
* Checking file: /var/opt/ignite/data/Rel_B.11.11/core_cfg
* Checking file: /var/opt/ignite/config.local

When adding the following from the CINDEX file to the INDEX file it fails :

cfg "2006-02-21,16:41 Recovery Archive" {
description "Recovery Archive"
"recovery/2006-02-21,16:41/system_cfg"
"recovery/2006-02-21,16:41/control_cfg"
"recovery/2006-02-21,16:41/archive_cfg"
}=TRUE

which now looks as followed :

cfg "HP-UX B.11.11 Default" {
description "This selection supplies the default system configuration that HP supplies for the B.11.11 release."
"/opt/ignite/data/Rel_B.11.11/config"
"/opt/ignite/data/Rel_B.11.11/hw_patches_cfg"
"/var/opt/ignite/data/Rel_B.11.11/core_cfg"
"/var/opt/ignite/config.local"
}

cfg "2006-02-21,16:41 Recovery Archive" {
description "Recovery Archive"
"recovery/2006-02-21,16:41/system_cfg"
"recovery/2006-02-21,16:41/control_cfg"
"recovery/2006-02-21,16:41/archive_cfg"
}=TRUE

The error now is as followed :

azur:root# /opt/ignite/bin/instl_adm -T
* Checking file: /opt/ignite/data/Rel_B.11.11/config
* Checking file: /opt/ignite/data/Rel_B.11.11/hw_patches_cfg
* Checking file: /var/opt/ignite/data/Rel_B.11.11/core_cfg
* Checking file: /var/opt/ignite/config.local
* Checking file: /var/opt/ignite/recovery/2006-02-21,16:41/system_cfg
ERROR: parser cannot open file:
/var/opt/ignite/recovery/2006-02-21,16:41/system_cfg: No such file or
directory (errno = 2)
* Checking file: /var/opt/ignite/recovery/2006-02-21,16:41/control_cfg
ERROR: parser cannot open file:
/var/opt/ignite/recovery/2006-02-21,16:41/control_cfg: No such file or
directory (errno = 2)
* Checking file: /var/opt/ignite/recovery/2006-02-21,16:41/archive_cfg
ERROR: parser cannot open file:
/var/opt/ignite/recovery/2006-02-21,16:41/archive_cfg: No such file or
directory (errno = 2)

Can any one tell me how I get this image to be seen by any install when igniting to the server.

Regards

Re: Ignite image

Steve Steel — Wed, 22 Feb 2006 07:33:15 GMT

Hi

The docs at
http://www.docs.hp.com/en/IUX/infolib.html#d0e352

and the faq especially should help

Steve Steel

Re: Ignite image

Bharat Katkar — Wed, 22 Feb 2006 08:38:54 GMT

Hi,

Attached doc has steps/procedure to configure images into INGNITE SERVER and updating your INDEX file accordingly.

Regards,

Re: Ignite image

Bharat Katkar — Wed, 22 Feb 2006 08:39:53 GMT

HI,
Check this one also. Should be helpful.

Regards,

topic Re: Ignite image in Operating System - HP-UX

Ignite image

Re: Ignite image

Re: Ignite image

Re: Ignite image