topic Re: HP-UX 10.20 in Operating System - HP-UX

HP-UX 10.20

Jake_8 — Mon, 07 Nov 2005 10:21:44 GMT

are there any late model servers that still support HP-UX 10.20 ?

Re: HP-UX 10.20

James R. Ferguson — Mon, 07 Nov 2005 10:26:26 GMT

Hi Jake:

As I recall, the Kx80 was the last model that supported 10.20 adn that's no longer manufactured. In fact, the life of the K-series was extended with the x80 to accomodate customers who needed upgraded hardware but couldn't move to 11.0

Remember, support for 10.20 officially ended June 30, 2003.

Regards!

...JRF...

Re: HP-UX 10.20

Victor BERRIDGE — Mon, 07 Nov 2005 10:32:07 GMT

Hi,
The DXXX and the KXXX are the only models to my knowledge to run 10.20 (the last D was D280/D380)

All the best
Victor

Re: HP-UX 10.20

H.Merijn Brand (procura — Mon, 07 Nov 2005 10:45:15 GMT

D390 (not D380)

d3 HP-UX 10.20/32 U 9000/800/D390 PA8000/240 pa-2.0 512 Mb

And though the D series has some issues with hardware not being compatable or supported inside the D series architecture, it might even outperform some of the K-series for HP-UX 10.20

Our D390 is still alive, but our K-series is long dead and burried

Enjoy, Have FUNE! H.Merijn

Re: HP-UX 10.20

Jake_8 — Mon, 07 Nov 2005 10:50:20 GMT

Thanks.

Re: HP-UX 10.20

Scot Bean — Tue, 08 Nov 2005 11:00:42 GMT

Any model server that can support a 32-bit mode should support 10.20.

Most servers in the last 5 years are 64-bit only, and therefore cannot.

Interesting note: most late-model HPUX workstations DO support 10.20, if you want to switch to something small but new.

Note also that SW updates for 10.20 ceased as of Dec2001.