https://community.hpe.com/t5/operating-system-hp-ux/sendmail-routing/m-p/2486842#M799466 We handle about 30 different domains coming into our gateway. Some of the domains are handle by different out-sourcing centers and need to be sent to different gateways depending on the user id and domain name. Messy I know but this is how it needs to be done. I need to be able to change the user id and/or domain name and then route them to different gateways. <BR /><BR />I setup a Virtusertable to try and accomplish the above. For example user1@domain.com is changed to user100@other.com. <BR /><BR />I have set up a mailertable to route mail going to other.com (for example) to go to 192.168.0.50 and domain.com goes to 192.168.100.20. The mailertable works but I can't get user1@domain.com to convert to user100@other.com. <BR /><BR />Any ideas if this would work or do I need to setup something different? Thu, 25 Jan 2001 21:03:32 GMT David Crowe 2001-01-25T21:03:32Z https://community.hpe.com/t5/operating-system-hp-ux/sendmail-routing/m-p/2486842#M799466 We handle about 30 different domains coming into our gateway. Some of the domains are handle by different out-sourcing centers and need to be sent to different gateways depending on the user id and domain name. Messy I know but this is how it needs to be done. I need to be able to change the user id and/or domain name and then route them to different gateways. <BR /><BR />I setup a Virtusertable to try and accomplish the above. For example user1@domain.com is changed to user100@other.com. <BR /><BR />I have set up a mailertable to route mail going to other.com (for example) to go to 192.168.0.50 and domain.com goes to 192.168.100.20. The mailertable works but I can't get user1@domain.com to convert to user100@other.com. <BR /><BR />Any ideas if this would work or do I need to setup something different? Thu, 25 Jan 2001 21:03:32 GMT https://community.hpe.com/t5/operating-system-hp-ux/sendmail-routing/m-p/2486842#M799466 David Crowe 2001-01-25T21:03:32Z