topic FTP Server Config in Operating System - HP-UX

FTP Server Config

Donny Jekels — Thu, 22 Aug 2002 19:37:51 GMT

Okay, guys/gals. to be politicaly correct.

Please help me configure my FTP server on a 10.20 box. i.e how do I change te timeout values, welcome message and tahnk you messages, also how do I lock the FTP server down to only one directory??

been out of the business for a while. please help !@!!!

Re: FTP Server Config

Brant Evans — Thu, 22 Aug 2002 19:51:38 GMT

Donny,

Have you looked at the man page for ftpd? It should tell you where the config files are and what parameters to set. I don't have a 10.20 system right now so I can't tell you exactly (the ftp server changed on 11.00).

Also make sure that you have the latest ftpd patch (PHNE_23948).

You may also want to look into installing wu-ftpd. This is a very good open source ftp server. HP used this ftp server for 11.00. A compiled binary can be found in the HP-UX porting archives at http://hpux.cs.utah.edu/hppd/hpux/Networking/FTP/wu_ftpd-2.6.1/

Hope this helps.

Re: FTP Server Config

steven Burgess_2 — Thu, 22 Aug 2002 19:58:58 GMT

Hi

Have a look at the attached

HTH

Steve

Re: FTP Server Config

Sanjay_6 — Thu, 22 Aug 2002 20:05:54 GMT

Hi,

If you had been using 11.0 or above, you could have used "ftpaccess" to tighten the ftp access to the system. On 11.0 do "man ftpaccess" for more info.

Hope this helps.

Regds

Re: FTP Server Config

Bill Hassell — Thu, 22 Aug 2002 21:59:43 GMT

Unfirtunately, ftpd is very limited on 10.20 so there are very few configuration choices. There is no control over the welcome message or controlling directory access as there is for the Washington University ftpd (WUftpd).

WUftpd has been standard on 11.0 and higher for a long time, but there is no patch for 10.20 as it is an obsolete product. You can look at the Liverpool Archive to get a replacement for ftpd:

http://hpux.connect.org.uk/hppd/hpux/Networking/FTP/wu_ftpd-2.6.1/