topic Re: swcopy & swinstall problem in Operating System - HP-UX

swcopy & swinstall problem

Roberto Gallis — Mon, 12 Feb 2001 10:34:45 GMT

Hi all,
I have a patch bundle on a tape and I want to add a new patch to the bundle before intalling.
I copy the patch bundle by the tape to a directory. Then I do the following
swcopy -s mypatch.depot \* @ patchbundledirectory
First error is "patch maypatch.depot: the source is a tape, cannot open the logfile on this target source. possibly the media is read-only..."
but my file permission are 755
Then swcopy has analysis succeded...
So when i launch swinstall -s patchbundledirectory and do an Install analysis mypatch has errors: mypatch is not AVAILABLE... make it sure its state is AVAILABLE...
But if I launch swisntall -s mypatch.depot Install analysis response is OK
Anybody can help me? What's wrong??

Regards
Roberto

Re: swcopy & swinstall problem

Lasse Knudsen — Mon, 12 Feb 2001 13:28:19 GMT

Are you bay any chance mixing 10.20 and 11.00 depots ?

Also the use of '-x autoselect_dependencies=false -x enforce_dependencies=false' may be of good use to you.

Re: swcopy & swinstall problem

Dan Hetzel — Mon, 12 Feb 2001 13:34:24 GMT

Hi Roberto,

swcopy -s /dev/rmt/?m \* @ /full_path_to/depot

swinstall -s /full_path_to/depot -x patch_match_target=true PATCHNAME

If the swcopy complains about patch being already in the depot, you could eiter:
swremove
or
use flags '-x reinstall=true'

Best regards,

Dan

Re: swcopy & swinstall problem

Roberto Gallis — Mon, 12 Feb 2001 14:04:04 GMT

Hi,
I fixed the problem creating _ACL files in catalog directory... the log indicated that some file were not found...
I relaunched swcopy doing reinstall=yes and then swinstall run ok...