topic Re: NAT or IP Masquarding using HP-UX 10.X or 11.X in Operating System - HP-UX

NAT or IP Masquarding using HP-UX 10.X or 11.X

Tom Henning — Mon, 12 Feb 2001 14:35:24 GMT

Is it possible to implement NAT or IP Masquarding using generic HP-UX 10.X or HP-UX 11.X? According to Corporate, LINUX is not secure enough to be put to use for this function and it must be done using either NT (of which I know nothing being a UNIX admin) or HP-UX.

Re: NAT or IP Masquarding using HP-UX 10.X or 11.X

Steven Sim Kok Leong — Mon, 12 Feb 2001 14:50:09 GMT

Hi,

When I think about NAT, the first thing that came across my mind is a firewall. You will usually need firewall software to perform NAT.

In my environment, we use Checkpoint FW-1 on Solaris to do NAT for the systems protected behind the Firewall. NAT takes up a considerable amount of CPU resources.

I am not sure though if Raptor firewall on HP-UX perform NAT.

Hope this helps. Regards.

Steven Sim Kok Leong
Brainbench MVP for Unix Admin
http://www.brainbench.com

Re: NAT or IP Masquarding using HP-UX 10.X or 11.X

Berlene Herren — Mon, 12 Feb 2001 15:10:49 GMT

Steven is correct,there is no native NAT or IP masquerading on the HP OS. You can check out

http://www.hp.com/security/products/firewall/

for HP solutions.

Berlene