topic Openssl in Operating System - HP-UX

Openssl

marco_186 — Wed, 28 Sep 2005 07:26:47 GMT

dear all , thanks for ur time

i wanted to install openssl-0.9.8 but i ve an error when i make ./config no-threads -fPIC
------------------------------------
Operating system: 9000/800-hp-hpux1x
WARNING! If you wish to build 64-bit library then you have to
invoke './Configure hpux64-parisc2-cc' *manually*.
You have about 5 seconds to press Ctrl-C to abort.
------------------------------
what this message mean

thanks all
B.R

Re: Openssl

Arunvijai_4 — Wed, 28 Sep 2005 07:30:35 GMT

You have to run something like,
./Configure threads shared zlib --openssldir=/usr/openssll hpux-gcc

Just take a look at ./Configure --help to get options.

-Arun

Re: Openssl

Luk Vandenbussche — Wed, 28 Sep 2005 07:30:53 GMT

Hi Marco,

You can find the binaries for HPUX here

http://hpux.connect.org.uk/hppd/cgi-bin/search?package=&term=/openssl

Re: Openssl

Alex Lavrov. — Wed, 28 Sep 2005 07:31:56 GMT

It means exactly what it says.

If you want you program to be compiled as 64-bit, you must abort and run this:
"./Configure hpux64-parisc2-cc"

Otherwise, you just wait and it will be compiled as 32-bit.

If your system is 64bit, it's better to compile it as 64bit as well.

Alex.

Re: Openssl

marco_186 — Wed, 28 Sep 2005 07:34:44 GMT

./configure --help

sh: ./configure: not found.

it was the result

Re: Openssl

VEL_1 — Wed, 28 Sep 2005 07:38:04 GMT

Its ./Configure --help

Re: Openssl

Alex Lavrov. — Wed, 28 Sep 2005 07:38:09 GMT

./Configure --help
./config --help

ls *onf*

Alex.

Re: Openssl

VEL_1 — Wed, 28 Sep 2005 07:41:16 GMT

Hi,

Please also look at the following link for OpenSSL Installation steps:

http://www.ratite.com/400CS/Docs/openssl/INSTALL.openssl.html

Re: Openssl

Arunvijai_4 — Wed, 28 Sep 2005 07:42:25 GMT

HP supported OpenSSL is bit older(OpenSSL 0.9.7e,). If you want, you can download from

http://h20293.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=OPENSSL11I

-Arun