topic I/O scan interpretation in Operating System - HP-UX

I/O scan interpretation

Mike Fisher_5 — Thu, 14 Aug 2003 14:19:02 GMT

Re: I/O scan interpretation

Chris Wilshaw — Thu, 14 Aug 2003 14:25:35 GMT

Mike,

As far as the C2490AM disk is concerned, check out

http://www.sieler.com/hpdisk.txt

This lists it as

Model Year Size Notes
----- ---- ------ ----------------------------------------------

C2490AM 2 SCSI-SE 3.5" 2.0 GB

Re: I/O scan interpretation

A. Clay Stephenson — Thu, 14 Aug 2003 14:49:10 GMT

The 28655A is not a FWD SCSI Card; it is a SE-SCSI Card with an integral Centronics parallel
printer port. The C1537A is a SE-SCSI DDS3 drive. I think the 2nd listing of the 28655A is simply the hardware path to the parallel port but it's been too long to remember E-box details.

Re: I/O scan interpretation

A. Clay Stephenson — Thu, 14 Aug 2003 14:50:46 GMT

To be more clear. I think the 2nd 28655A listing is actually the same card above it; it's simply the parallel port device path.

Re: I/O scan interpretation

Mike Fisher_5 — Thu, 14 Aug 2003 15:04:06 GMT

Clay:

Yup - I was confusing these...
28655A. SE SCSI interface
28696A. FWD SCSI-2 interface

Re: I/O scan interpretation

George Neill — Fri, 15 Aug 2003 11:32:03 GMT

The C2490AM disk is also a 2GB disk.

George

Re: I/O scan interpretation

Mike Fisher_5 — Fri, 15 Aug 2003 11:39:54 GMT

George

Thanks for your trouble,
but see end of Chris's post

Regards
Mike