topic Re: .depot file in Operating System - HP-UX

.depot file

Adi_7 — Tue, 19 Aug 2003 20:44:41 GMT

Hi all,
I want to install a .depot file on hp.Its the file containing the Java software.
How do I install that?
Thanks

Re: .depot file

A. Clay Stephenson — Tue, 19 Aug 2003 20:49:43 GMT

After you get the .depot file downloaded (make sure the transfer is binary), you use the swinstall command. Swinstall invoked without arguments will prompt you for the source (your .depot file). You then 'Mark' the desired software, and 'Actions->Install'. It will analyze the package making sure dependencies are met and then ask if you want to install.

Re: .depot file

GK_5 — Tue, 19 Aug 2003 20:55:10 GMT

export your display variable and run swinstall.
Select local directory and type full path.
Select the software, mark for install and install.

Re: .depot file

Michael Tully — Tue, 19 Aug 2003 21:10:51 GMT

The interactive version is the best, as you have total control over what is going on. Make sure that you use the full path to the depot file or it won't find it. You only need to export your DISPLAY if you wish to use an motif GUI session.

Re: .depot file

Adi_7 — Tue, 19 Aug 2003 21:14:36 GMT

swinstall command without arguments is not working for me.

Do you have any alternate solutions?
Thanks

Re: .depot file

Adi_7 — Tue, 19 Aug 2003 21:15:51 GMT

This may sound silly.But how to export the display variables?

Re: .depot file

A. Clay Stephenson — Tue, 19 Aug 2003 21:20:15 GMT

I assume that you do not have an X terminal (or PC based emulator). If that is the case, do not set and export DISPLAY (if you have set it then do an unset DISPLAY) and simply type swinstall. You must be super-user to run swinstall. Can you be a bit more specific than "swinstall without arguments in not working for me"? What errors are you getting?

If this is a .depot file then swinstall is your only option.

Re: .depot file

GK_5 — Tue, 19 Aug 2003 21:20:34 GMT

# export DISPLAY=hostname:0.0

Re: .depot file

Adi_7 — Tue, 19 Aug 2003 21:35:07 GMT

After setting ths display,I'm getting following error.
# swinstall

The DISPLAY environment variable is set to "HPUX_11-11", but
the current configuration won't allow swinstall to run on that display.

The DISPLAY environment variable may be incorrect, or, if you are
running swinstall remotely, you may need to allow the remote system
to access your local X server by typing

/usr/bin/X11/xhost +HPUX_11-11

on your local machine.

Do you want to proceed using the terminal version of swinstall?
(yes or no) [yes]

If I stiil enter yes, I can go to GUI.But when I try to specify local directory,it gives following error.
The default source "/var/spool/sw" does not exist or is not a valid source and there are no other registered depots on HPUX_11-11. You can type in the depot path on this host or choose a different host.

Re: .depot file

Michael Tully — Tue, 19 Aug 2003 21:44:34 GMT

Just type in the full path name of the depot file.

e.g. /tmp/java.depot

Re: .depot file

A. Clay Stephenson — Tue, 19 Aug 2003 21:51:23 GMT

First,

unset DISPLAY
swinstall
When you get the error messages (they're normal) about /var/spool/sw enter .

You should now see 'Source Depot Type: ', Press and user the to select 'Local Directory'. Then to 'Source Depot Path' and enter your .depot file and to [OK] and .

This should put you in the "Software Selection" menu. Use the to hilite then desired software. Next and to 'Actions' and Press 'M' for Mark. Next, and to 'Actions' and 'I' (Install). You should be able to get the rest done from this point.

Re: .depot file

Tim Adamson_1 — Tue, 19 Aug 2003 21:53:06 GMT

Once you have the depot downloaded, preview the install as follows:

# swinstall -p -s *

Check the log file and if all is ok, then do the actual install:

# swinstall -s *

Example:

# swinstall -s /tmp/java.depot *

Hope it helps

Tim

Re: .depot file

A. Clay Stephenson — Tue, 19 Aug 2003 21:56:45 GMT

One final point, it is essential that you have the TERM variable set and exported that matches your terminal or PC emulation.

e.g.
export TERM=vt100
swinstall