topic Re: fbackup problem in Operating System - HP-UX

fbackup problem

O'lnes — Tue, 03 Sep 2002 01:08:04 GMT

When I run the fbackup , it pop up the below message, what is that mean?

WARNING: unable to read a volume header

Re: fbackup problem

Michael Tully — Tue, 03 Sep 2002 02:03:56 GMT

Hi,

This message indicates that the tape your using has not been used for fbackup on it's previous backup. The message will also appear if it is a new tape. If it has been used for 'tar' or 'cpio' this message will appear.

HTH
Michael

Re: fbackup problem

Michael Tully — Tue, 03 Sep 2002 02:07:29 GMT

If you run the following command, it will show you all of the 'fbackup' error codes.

# strings /usr/lib/nls/C/fbackup.cat |more

Re: fbackup problem

Amod Phadke — Tue, 03 Sep 2002 03:27:40 GMT

This message just means that the tape is being used for 'fbackup' for the first time.This is just a 'warning' and will not hamper your bakcup procedure.

Re: fbackup problem

O'lnes — Tue, 03 Sep 2002 04:11:55 GMT

anther message:

After I run frecover, it pop up:

frecover(2114): read error from input device (I/O error)
frecover(2114): read error from input device (I/O error)
frecover(2113): unable to resync backup media

What is the problem?

Re: fbackup problem

T G Manikandan — Tue, 03 Sep 2002 10:26:31 GMT

found two docs

http://support1.itrc.hp.com/service/cki/docDisplay.do?docLocale=en_US&docId=200000062762168

http://support1.itrc.hp.com/service/cki/docDisplay.do?docLocale=en_US&docId=200000062965572

Thanks