topic Re: panic in Operating System - HP-UX

panic

tarek_3 — Fri, 25 Apr 2003 06:59:07 GMT

hi
below i attached the output of crashinfo .

Re: panic

Steve Steel — Fri, 25 Apr 2003 07:50:39 GMT

Hi
Panic points to a bad processor
CPU 1

Steve Steel

Re: panic

Steven E. Protter — Fri, 25 Apr 2003 13:01:53 GMT

You analyzed the dump?

See attachment.

I agree on the CPU assessment.

SEP

Re: panic

LucianoCarvalho — Fri, 25 Apr 2003 13:08:42 GMT

hi,

I think would be better you open a HW case on HP, so they can analyse the pim of your machine and tell you what happened.

regards

Re: panic

Paula J Frazer-Campbell — Fri, 25 Apr 2003 14:26:21 GMT

Hi

HPMC = hardware fault

CPU1 :-

s
t
a spin reg spl eirr ipsw
evt cpu t type dpth src cr15 cr22 cr22
--- --- - ----- ---- --- ---------------- ---------------- ----------------
0 1 E HPMC 0 rpb fffffff0ffffffff 0000000000000000 0804cf1f WCRQPDI

Log a support call and get it changed.

Paula

Re: panic

Pradeep_3 — Sun, 27 Apr 2003 04:30:03 GMT

HPMC=High Priority Machine check

And since it shows HPMC on CPU1 as per crash dump, log a hardware case to HP or vendor providing srevices on behalf of HP.

Information attached by steve is vry useful..

Paresh

Re: panic

Eugeny Brychkov — Sun, 27 Apr 2003 17:53:24 GMT

Tarek,
do you read posts? Now is the third time I'm asking for either 'pim' command output or /var/adm/tombstones/ts99 file.
Output of crashinfo DO NOT point to CPU1. It says that CPU1 initiated HPMC. And nothing more. If you all will look into crashinfo output contents you will see

Note: This appears to be a BUS check hpmc. BUS Checks are often caused by hardware problems, but there are many software causes as well. To progress a BUS Check HPMC you will normally need to obtain the hardware TOMBSTONE and analyse it

Eugeny

Re: panic

Eugeny Brychkov — Sun, 27 Apr 2003 18:03:00 GMT

http://forums.itrc.hp.com/cm/QuestionAnswer/1,,0x2c7238dfa974d711abdc0090277a778c,00.html
Eugeny

Re: panic

tarek_3 — Tue, 29 Apr 2003 05:40:03 GMT

Sorry Eugency
and thanks for all.
Eugeny. my client was on holiday (Easter holiday), this is why I wasn't able to send you the tombstones file. I will try and send it today. Thank you once more.