topic Re: dmesg output in Operating System - HP-UX

dmesg output

Pocius Arturas — Tue, 03 Sep 2002 13:12:59 GMT

Re: dmesg output

Rodney Hills — Tue, 03 Sep 2002 13:22:52 GMT

Looks like the system is having trouble initiating any I/O onthe SCSI controller. Could be a hardware problem on one of the scsi devices or the scsi controller itself.

Also, make sure all the connections are good and that the terminator is also connected.

Hope this helps...

-- Rod Hills

Re: dmesg output

Paula J Frazer-Campbell — Tue, 03 Sep 2002 13:28:03 GMT

Hi

Scsi controller - on bus 4 and 5
Do and ioscan -fnc bc

to see hardware addresses.

Paula

Re: dmesg output

S.K. Chan — Tue, 03 Sep 2002 13:31:15 GMT

Check (docid=KBRC00001951). It'll give you some idea what it meant. To me it looks like your scsi controller is failing.
http://support1.itrc.hp.com/service/cki/docDisplay.do?docLocale=en_US&docId=200000059199380
Hope it helps ..

Re: dmesg output

Sajid_1 — Tue, 03 Sep 2002 13:32:28 GMT

hello,

This can be:
a patch issue
a SCSI error. Check the devices with stm tools:
# stm

Re: dmesg output

MANOJ SRIVASTAVA — Tue, 03 Sep 2002 13:43:32 GMT

Do u ahve a Jamica Boxconencted tot he amchine , it looks etiher there ia power porblem or on of the disk in the enclosure is not good.

Manoj Srivastava