topic Re: SSH in Operating System - HP-UX

SSH

mrli2 _2000 — Sat, 19 Apr 2003 09:20:56 GMT

Please help!!!

I am using HP-UX 11.00, and I just downloaded and installed SSH T1471AA successfully. But when I tried to run "ssd start", I got the ???Executable file incompatible with hardware??? error. Please help..

Thank you

Re: SSH

Michael Steele_2 — Sat, 19 Apr 2003 13:05:55 GMT

NOTE: "The HP-UX Secure Shell daemon (sshd) is pre-configured and starts after installation."

You don't have to "ssd start".

Get the right 11.0 and not the 11.i version? What about patch PHCO_25527? Support Plus 5012-0049?

Right click on the ftp link and 'save target as'

Did you ftp the download to your PC? And then binary ftp from PC to HP-UX server from PC DOS prompt?

From PC:
ftp HP server
login
password
bin
cd /tmp
put T1471AA
quit

verify proper download:

$ swlist -d /tmp/T1471AA.depot

Re: SSH

Brian Markus — Sun, 20 Apr 2003 03:48:02 GMT

I had this problem on fresh install. Once I updated the patches it went away.

Re: SSH

Steven E. Protter — Sun, 20 Apr 2003 03:56:47 GMT

Attaching a doc that will help you with some basic startup tasks.

Exchanging public keys, etc..

SEP

Re: SSH

mrli2 _2000 — Sun, 20 Apr 2003 07:26:31 GMT

thank you so much all of you. I just updated the patch PHCO_25527, and I reinstalled the ssh again. It seems ok of the installation, but when I check the log file that if says the execution(sshd start) denied, but I was the root user. Please help again... thanks

Re: SSH

Sorrel G. Jakins — Sun, 20 Apr 2003 11:52:15 GMT

Is that because it is already started?

Re: SSH

mrli2 _2000 — Sun, 20 Apr 2003 17:41:09 GMT

No, I didn't find it when I ran the "ps -ef | grep sshd" command.

Thanks,

Re: SSH

Duncan Ball — Tue, 22 Apr 2003 00:27:52 GMT

Are you installing the 3.50 version of T1471AA for 11.0 on a PA-RISC 1 system? I had problems with this - there did not appear to be a PA-RISC 1 compatible binary in the depot, only PA-RISC 2. Am I missing something?

Re: SSH

TANGUY_1 — Mon, 05 May 2003 13:07:09 GMT

I agree that the file packaged in the PA_RISC1 directory with the 3.5 version of sshd does not seems to be the good one.
Is that a problem with the delivery ?
Did they test the 3.5 binaries on a PA_RISC1 platform ?

Re: SSH

Steven E. Protter — Mon, 05 May 2003 19:29:14 GMT

I have encountered your problem.

The depot on software.hp.com is wrong. Contact HP support and they will set up an ftp site with the correct depot.

I have a copy of the depot but am unsure as to whether I should distribute HP depot packages.

See this thread:

http://forums.itrc.hp.com/cm/QuestionAnswer/1,,0x7c155ec05a7ad711abdc0090277a778c,00.html

SEP

Re: SSH

Steven E. Protter — Mon, 05 May 2003 20:37:46 GMT

HP has verified the problem I point out in my previous post.

This shows the value of a software contract, no matter how good these forums are. It means you need to contact HP and get the right depot.

Good Luck.

SEP