topic Re: Ultrium Question in Operating System - HP-UX

Ultrium Question

Ashwin_4 — Mon, 12 Sep 2005 01:17:07 GMT

Hi Masters'
I'm having Ultrium LTO. How Can I know the free space available on the TAPE. Also, Is there any command to clean the tape?

Thanks

Re: Ultrium Question

RAC_1 — Mon, 12 Sep 2005 01:25:26 GMT

Unless you know what is on tape, in what format, you can not tell what is free space on it.??

What drive do you use?? What backup software??

Re: Ultrium Question

Ashwin_4 — Mon, 12 Sep 2005 01:30:47 GMT

Sorry for incomplete details.
We are taking backup of Unix (HP-UX 11.x) file system on LTO. Only single tape of 250Gb is alloted for my server. So before start the backup i want to know how much space is free available on the Tape.
I'm taking backup using SAVE command.

Thanks

Re: Ultrium Question

morganelan — Mon, 12 Sep 2005 01:34:58 GMT

Are you using Legato Networker Backup SOftware?

Re: Ultrium Question

Ashwin_4 — Mon, 12 Sep 2005 01:37:15 GMT

Yes.
I need above info to write a shell script for taking system backup.

Re: Ultrium Question

RAC_1 — Mon, 12 Sep 2005 01:41:33 GMT

What is this save command??

type save

Re: Ultrium Question

morganelan — Mon, 12 Sep 2005 01:45:10 GMT

If you are using Legato, you can see %used of tape in volume menu that looks like follows:
Volume BarCode Pool Writen %Used Mode
Test xxxxxL1 Test 20 GB 21% append

Re: Ultrium Question

Ashwin_4 — Mon, 12 Sep 2005 01:47:00 GMT

save -q -s ctyhnm01.mtnlcty.com -b W1TRSYS1 -c west1tr -I $BAK_HOME/if_full -N FULL

Re: Ultrium Question

Ashwin_4 — Mon, 12 Sep 2005 01:49:19 GMT

Hi morganelan,
Is there any command to get the above info. I dont want to use the graphical menu.

Re: Ultrium Question

morganelan — Mon, 12 Sep 2005 01:57:43 GMT

Try using :
#nsrjb -s

Re: Ultrium Question

Leif Halvarsson_2 — Mon, 12 Sep 2005 02:35:42 GMT

Hi,

There is no reliable way to check remaining space an a media if hardware compression is used (which is default). As as compression ratio is data dependant, there can be big differences from one time to another. The only (reliable( way is to run the drive in native mode (and subtract the data, written to the tape from the native media capacity). But, in that case you will loose an average of half the media capacity and, also much of the drive speed.

LTO drives should not be cleaned unless the drive request for cleaning. Most backup softwares can be condigured for automatic cleaning. The cleaning interval for such drives is very long and you will see little use of the cleaning media.

Re: Ultrium Question

Robert-Jan Goossens — Mon, 12 Sep 2005 05:12:18 GMT

Try,

# mminfo -m

or if you have a jukebox

# nsrjb -v

Regards,
Robert-Jan.

Ps. it would be nice if you update your points!
http://forums1.itrc.hp.com/service/forums/pageList.do?userId=CA1031169&listType=question&forumId=1