topic Re: DAT24x6 API Commands in Operating System - HP-UX

DAT24x6 API Commands

Tom Dawson — Wed, 04 Sep 2002 18:08:50 GMT

Hi,

I have to connect a DAT24x6 DDS-3 Autoloader to a Sun server ( I know, I know...). On my HP-9000s I've been through the process documented in document KBAN00000190 and I have no problem using the "mc" command on HP-UX. But Sun support has told me there is no equivalent command in Solaris.

Can anyone point me to documentation on the DAT24x6 autoloader that shows the low-level hardware commands that manipulate the picker in a DAT24x6 autoloader?

Thanks,
Tom

Re: DAT24x6 API Commands

Leif Halvarsson_2 — Wed, 04 Sep 2002 18:39:46 GMT

Hi
If I am right this is a SCSI-2 library,perhaps this book can help you.

http://www.pearsonptg.com/book_detail/0,3771,0201175142,00.html

Another possibility, if your company uses OmniBack ther is a utility in omniback called "uma" which are similar to "mc". There is a Solaris version for this command too.

Re: DAT24x6 API Commands

Tom Dawson — Thu, 05 Sep 2002 12:09:06 GMT

Leif,

Thanks, but we're trying to avoid having to purchase something like OmniBack.

During further research last night, I did find this document: Doc Id lpg51069 ( HP SureStore DAT - Sun Workstation Configuration ). It seems to get me part way there. At least to getting the device drivers set up. I'll try that process this weekend. It refers to a "mtx" utility. I haven't found that in Solaris yet.

Thanks again,
Tom

p.s. The ITRC Search engine would not find document lpg51069 by seaching for "lpg51069". I found it by seaching for "DAT24x6".

Re: DAT24x6 API Commands

Tom Dawson — Fri, 06 Sep 2002 13:15:04 GMT

I found "mtx" at:

http://mtx.sourceforge.net/