topic Re: bs getting crazy in Operating System - HP-UX

bs getting crazy

Emilio Nunez — Wed, 19 Mar 2003 21:52:49 GMT

using the bs command then you type ctrl-c then the screen get crazy, why happen this ??

Re: bs getting crazy

Jeff Schussele — Wed, 19 Mar 2003 21:59:15 GMT

Hi Emilio,

Suspect your TERM definition is a problem here.

echo $TERM

before you start bs & if it doesn't match what you're currently using, change it.

Rgds,
Jeff

Re: bs getting crazy

Emilio Nunez — Wed, 19 Mar 2003 22:02:25 GMT

Jeff, my TERM value is set to "hp".

Re: bs getting crazy

Jeff Schussele — Wed, 19 Mar 2003 22:03:55 GMT

And you terminal or emulation is.......?

Rgds,
Jeff

Re: bs getting crazy

Emilio Nunez — Wed, 19 Mar 2003 22:05:44 GMT

I use Reflection with HP emulation

Re: bs getting crazy

A. Clay Stephenson — Wed, 19 Mar 2003 22:05:50 GMT

1) Do a stty -a and note the value of intr. It should typically be set to Cntl-C to
trigger an interupt.

2) Make sure that the setting of your terminal (or emulator) matches the TERM environment variable.

3) Make sure that no traps are in place to coerce the SIGINT signal.

Re: bs getting crazy

Emilio Nunez — Wed, 19 Mar 2003 22:13:22 GMT

There are no traps, my intr value is set to ctlr-c and the reflection Terminal type is HP2392A

Re: bs getting crazy

A. Clay Stephenson — Wed, 19 Mar 2003 22:26:48 GMT

Okay but is your TERM variable then set to 2392A and exported?

Also, when you do a stty -a is anything else set to Ctrl-C?