topic Re: vmstat - sar in Operating System - HP-UX

vmstat - sar

jay_40 — Mon, 09 Sep 2002 07:54:13 GMT

Hi all,

What's difference between sar -q (field runq-sz)and vmstat (field r ).

Thank you

Re: vmstat - sar

John Palmer — Mon, 09 Sep 2002 08:17:07 GMT

sar reports the average length of the run queue over the interval whereas vmstat reports the length of the queue when the snapshot is taken. Hence vmstat's output is an integer whereas sar's is to one decimal place.

Regards,
John

Re: vmstat - sar

Stefan Farrelly — Mon, 09 Sep 2002 08:21:03 GMT

The vmstat field r is the number of processes actually heavily using a single cpu at the time. eg. on a 4 cpu server if you say have 3 large oracle db processes running - each will use a single cpu (say using 90%+ of each cpu) then vmstat shows 3 processes in the run q (one runing on each of 3 cpu's). If the 4th cpu gets used also this value could jump to 4 but I dont think it could ever go over 4 (the max number of cpu's on the server).

sar -q (runq-sz) is the number of processes backed up or in the global queue (all cpu's). Its more of a global metric (than vmstat above). The ideal is a run queue length of 1 per cpu - so on a 4 cpu server any runq up to 4 is fine. Uptime also reports runq length but over different time periods so its a bit better.