topic Re: Problem with Mirror in Operating System - HP-UX

Problem with Mirror

Jose_129 — Sat, 13 Aug 2005 12:36:05 GMT

I need replace the fail disk with mirror, but display:

# vgcfgrestore -n /dev/vg00 /dev/dsk/c1t2d0
vgcfgrestore: Couldn't query physical volume "/dev/dsk/c1t2d0":
The specified path does not correspond to physical volume attached to
this volume group
Configuration info for Physical Volume "/dev/dsk/c1t2d0" not found
in "/etc/lvmconf/vg00.conf" :
Character-special file for PV not supplied on command line, OR
PV did not belong to Volume Group /dev/vg00 when configuration file was created

Re: Problem with Mirror

Devender Khatana — Sat, 13 Aug 2005 13:10:40 GMT

Hi,

Try

vgcfgrestore -n /dev/vg00 /dev/rdsk/c1t2d0
(Notice the rdsk in place of dsk)

If not resolved post the output of "strings /etc/lvmtab" & "vgdisplay -v vg00".

HTH,
Devender

Re: Problem with Mirror

Eknath — Sat, 13 Aug 2005 16:58:07 GMT

Hi,

Please find steps attached for replacing mirrored PV

Cheers!!!
eknath

Re: Problem with Mirror

Mahesh Kumar Malik — Sun, 14 Aug 2005 02:18:25 GMT

Hi Jose

Please use following syntax

#vgcfgrestore -n /dev/vg00 /dev/rdsk/c1t2d0

Regards
Mahesh

Re: Problem with Mirror

Torsten. — Mon, 15 Aug 2005 11:09:29 GMT

Jose,

have a look at this interesting thread:

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=117946