topic Re: Help!! (For a beginner) in Operating System - HP-UX

Help!! (For a beginner)

Matthew Perrett — Mon, 18 Nov 2002 03:59:16 GMT

I would really apprecate a hand on this one asap. I know it's probably a simple problem, but I'm afraid that I'm a little lost on how to solve it.

I don't know what I've actually done, but whenever I hit the ENTER key, "^J" is shown. How do I fix this?

Re: Help!! (For a beginner)

Michael Tully — Mon, 18 Nov 2002 04:18:07 GMT

Hi,

The best way would be to kill the session entirely and start your session once more. Can you kill the session from another terminal??

This type of problem can occur by changing the key function(s) by using the 'stty' command.

Regards
Michael

Re: Help!! (For a beginner)

Scott Van Kalken — Mon, 18 Nov 2002 04:24:11 GMT

you can also try typing "stty sane" to see if this fixes your problem straight away.

Sometimes does, sometimes doesn't.

Re: Help!! (For a beginner)

Michael Tully — Mon, 18 Nov 2002 04:36:14 GMT

The reason I suggested to kill the terminal session instead of using "stty sane" was because the enter key was the problem key, not some other key.

Re: Help!! (For a beginner)

Matthew Perrett — Mon, 18 Nov 2002 07:35:53 GMT

Thanks for responding so quickly.

I did kill tehe terminal session, but that didn't actually do anything.

It's pretty strange, because I only used the stty -a function, so that shouldn't have changed any of the key strokes. I didn't restart the actual server in question. Try that?

Re: Help!! (For a beginner)

Matthew Perrett — Mon, 18 Nov 2002 07:38:13 GMT

... Also, I tried stty sane. Didn't work. What the hell would ENTER have defaulted to?!? If I knew that then I'd be able to fix the problem. :(

Re: Help!! (For a beginner)

Billy Ng — Tue, 19 Nov 2002 18:10:35 GMT

1) You may try to use the command: "xmodmap -pk". It should show you how your keyboard is mapped.
2) Then, you should try "xmodmap -e "keycode <##> = Enter" where <##> is the keycode for the Enter key.

Re: Help!! (For a beginner)

harry d brown jr — Tue, 19 Nov 2002 18:23:53 GMT

Can you post the output of

stty -a

echo $TERM

Are you using the Console or a terminal emulation package via a PC runing some kind of M$ OS ?? Like Exceed or Reflections??

thanks,

live free or die
harry

Re: Help!! (For a beginner)

Darrell Allen — Tue, 19 Nov 2002 18:24:38 GMT

What type of terminal are you using? Are you using a terminal emulator? Can you go into setup on your terminal or emulator and check settings?

Try entering Ctrl-M instead of ENTER (so you can do things like "stty -a").

Darrell

Re: Help!! (For a beginner)

Matthew Perrett — Wed, 20 Nov 2002 04:29:12 GMT

Thanks a lot, everyone, for all your help. I restarted the server, and it is working fine now. Just one of them strange things that happen now and then, I guess. I appreciate your assistance.