Installing qlogic 2342

yatin — Wed, 03 Aug 2005 00:46:11 GMT

I have installed qla2342 hba card in rx4640 m/c.But IO scan doesnot show any disks connected via this card.I have 2 rx4640 m/cs and I am facing this problem on both.Tried changing JBODs but dint work.Green and Orange leds are ON (on hba)

Re: Installing qlogic 2342

generic_1 — Wed, 03 Aug 2005 01:08:35 GMT

do an ioscan
then insf -e
then ioscan -fnC fc
then ioscan -fnC disk

do a tdutil or fcmsutil on the fiber card it it is clamied an make sure it says online

if you have a switch check your zones.

check any lun maskinf if it applies.

If this is a replacement hba you may need to do a replace disk with lvm.

Re: Installing qlogic 2342

yatin — Wed, 03 Aug 2005 01:55:47 GMT

ioscan -fnC fc didnot show any devices
# ioscan
H/W Path Class Description
==========================================================
root
0 ioa System Bus Adapter (1229)
0/0 ba Local PCI-X Bus Adapter (122e)
0/0/1/0 tty PCI SimpleComm (103c1290)
0/0/1/1 tty PCI Serial (103c1048)
0/0/2/0 usb NEC USB Interface
0/0/2/0.1 usbhub USB Root Hub
0/0/2/1 usb NEC USB Interface
0/0/2/1.1 usbhub USB Root Hub
0/0/2/1.1.2 usbhid USB HID Kbd(0)
0/0/2/2 usb NEC USB Interface
0/0/3/0 sideba CMD IDE controller
0/0/3/0.0 ext_bus IDE Primary Channel
0/0/3/0.0.0 target
0/0/3/0.0.0.0 disk TEAC DV-28E-C
0/0/3/0.0.7 target
0/0/3/0.0.7.0 ctl Initiator
0/0/3/0.1 ext_bus IDE Secondary Channel
0/0/3/0.1.7 target
0/0/3/0.1.7.0 ctl Initiator
0/0/4/0 graphics PCI Display (10025159)
0/1 ba Local PCI-X Bus Adapter (122e)
0/1/1/0 ba PCItoPCI Bridge
0/1/1/0/4/0 ext_bus PCI-X SmartArray 6402 RAID Contro
ller
0/1/1/0/4/0.0 target
0/1/1/0/4/0.0.0 disk HP LOGICAL VOLUME
0/1/1/0/4/0.7 target
0/1/1/0/4/0.7.0 ctl Initiator
0/1/2/0 lan HP AB352-60001 PCI/PCI-X 1000Base
-T Dual-port Core
0/1/2/1 lan HP AB352-60001 PCI/PCI-X 1000Base
-T Dual-port Core
0/2 ba Local PCI-X Bus Adapter (122e)
0/3 ba Local PCI-X Bus Adapter (122e)
0/3/1/0 unknown PCI-X SerialBus (10772312)
0/4 ba Local PCI-X Bus Adapter (122e)
0/5 ba Local PCI-X Bus Adapter (122e)
120 processor Processor
121 processor Processor
122 processor Processor
123 processor Processor
250 ba Core I/O Adapter
250/0 ipmi IPMI Controller
250/1 acpi_node Acpi Hardware
# insf -e
insf: Installing special files for asio0 instance 0 address 0/0/1/0
insf: Installing special files for asio0 instance 1 address 0/0/1/1
insf: Installing special files for hub instance 0 address 0/0/2/0.1
insf: Installing special files for hub instance 1 address 0/0/2/1.1
insf: Installing special files for hid instance 0 address 0/0/2/1.1.2
insf: Installing special files for sdisk instance 0 address 0/0/3/0.0.0.0
insf: Installing special files for sctl instance 0 address 0/0/3/0.0.7.0
insf: Installing special files for sctl instance 1 address 0/0/3/0.1.7.0
insf: Installing special files for sdisk instance 1 address 0/1/1/0/4/0.0.0
insf: Installing special files for sctl instance 2 address 0/1/1/0/4/0.7.0
insf: Installing special files for ipmi instance 0 address 250/0
insf: Installing special files for pseudo driver cn
insf: Installing special files for pseudo driver mm
insf: Installing special files for pseudo driver udp
insf: Installing special files for pseudo driver tcp
insf: Installing special files for pseudo driver rawip
insf: Installing special files for pseudo driver nuls
insf: Installing special files for pseudo driver ptym
insf: Installing special files for pseudo driver ptys
insf: Installing special files for pseudo driver ip
insf: Installing special files for pseudo driver arp
insf: Installing special files for pseudo driver tlcotsod
insf: Installing special files for pseudo driver tlcots
insf: Installing special files for pseudo driver dmem
insf: Installing special files for pseudo driver tlclts
insf: Installing special files for pseudo driver devkrs
insf: Installing special files for pseudo driver dmp
insf: Installing special files for pseudo driver stcpmap
insf: Installing special files for pseudo driver tels
insf: Installing special files for pseudo driver telm
insf: Installing special files for pseudo driver dev_config
insf: Installing special files for pseudo driver strlog
insf: Installing special files for pseudo driver sad
insf: Installing special files for pseudo driver vols
insf: Installing special files for pseudo driver asyncdsk
insf: Installing special files for pseudo driver echo
insf: Installing special files for pseudo driver dlpi
insf: Installing special files for pseudo driver ptm
insf: Installing special files for pseudo driver pts
insf: Installing special files for pseudo driver klog
insf: Installing special files for pseudo driver sy
insf: Installing special files for pseudo driver kepd
insf: Installing special files for pseudo driver diag2
insf: Installing special files for pseudo driver root
# ioscan -fnC fc
# ioscan -fnC disk
Class I H/W Path Driver S/W State H/W Type Description
============================================================================
disk 0 0/0/3/0.0.0.0 sdisk CLAIMED DEVICE TEAC DV-28E-C
/dev/dsk/c0t0d0 /dev/rdsk/c0t0d0
disk 1 0/1/1/0/4/0.0.0 sdisk CLAIMED DEVICE HP LOGICA
L VOLUME
/dev/dsk/c2t0d0 /dev/rdsk/c2t0d0
/dev/dsk/c2t0d0s1 /dev/rdsk/c2t0d0s1
/dev/dsk/c2t0d0s2 /dev/rdsk/c2t0d0s2
/dev/dsk/c2t0d0s3 /dev/rdsk/c2t0d0s3

Re: Installing qlogic 2342

Matti_Kurkela — Wed, 03 Aug 2005 04:37:47 GMT

Hmm, the hardware path 0/3/1/0 shows as "unknown PCI-X SerialBus". Is this the path for the slot the card is in?

This could be the qla2342 if the driver for the card is not installed and enabled in the kernel configuration.

After installing the driver, the card should get identified properly in the ioscan listing.

Re: Installing qlogic 2342

Mahesh Kumar Malik — Wed, 03 Aug 2005 07:34:16 GMT

Hi Yatin

Apply the latest patch bundle and you should have the driver. Therafter check

#ioscan -fnC fc for the presence of card

Regards
Mahesh

Re: Installing qlogic 2342

yatin — Thu, 04 Aug 2005 00:21:43 GMT

I installed July 2005 patch bundle but still same problem

Re: Installing qlogic 2342

Bob_Vance — Thu, 04 Aug 2005 07:28:29 GMT

Are you using a HP-supported card?
(A6826A , A6795A)

It's not the JBOD, because 'ioscan' is not even seeing your PCI card.

You should see something like this from 'ioscan':

... 0/2 ba Local PCI-X Bus Adapter (783)
... 0/2/1/0 fc HP Tachyon XL2 Fibre Channel Mass Storage Adapter
... 0/2/1/0.1 fcp FCP Domain

I agree that it's probably the card at

... 0/3/1/0 unknown PCI-X SerialBus

and that you must go into SAM and be sure that the Fibre Channel driver is there. Just install all the drivers that start with "fc" to be sure.

Otherwise, it might just be a bad card.

hth
bv

topic Re: Installing qlogic 2342 in Operating System - HP-UX

Installing qlogic 2342

Re: Installing qlogic 2342

Re: Installing qlogic 2342

Re: Installing qlogic 2342

Re: Installing qlogic 2342

Re: Installing qlogic 2342

Re: Installing qlogic 2342