topic Re: pvcreate error: damaged disk? in Operating System - HP-UX

pvcreate error: damaged disk?

Mihails Nikitins — Tue, 10 Apr 2001 15:34:58 GMT

Hello,

I got the following error trying to create physical volume

# pvcreate /dev/rdsk/c0t4d0
pvcreate: clearing the bad block directory: I/O error

iocsan and diskinfo recognize the disk (c0t4d0)

# ioscan -fn -C disk

============================
disk 0 56/52.1.0 disc3 CLAIMED DEVICE SEAGATE ST34520N
/dev/dsk/c0t1d0 /dev/rdsk/c0t1d0
/dev/floppy/c0t1d0 /dev/rfloppy/c0t1d0
disk 2 56/52.4.0 disc3 CLAIMED DEVICE FUJITSU M2909S-512
/dev/dsk/c0t4d0 /dev/rdsk/c0t4d0
/dev/floppy/c0t4d0 /dev/rfloppy/c0t4d0

# diskinfo -v /dev/rdsk/c0t4d0
SCSI describe of /dev/rdsk/c0t4d0:
vendor: FUJITSU
product id: M2909S-512
type: direct access
size: 3027417 Kbytes
bytes per sector: 512
rev level: 0127
blocks per disk: 6054834
ISO version: 0
ECMA version: 0
ANSI version: 2
removable media: no
response format: 2

How it is possible to get to know if the disk is physically damaged? The disk allows to copy something by dd, however, sometimes claims I/O errors

# dd if=/etc/ntp.conf of=/dev/dsk/c0t4d0
9+1 records in
9+1 records out

# dd if=/etc/ntp.conf of=/dev/rdsk/c0t4d0
I/O error
9+1 records in
9+1 records out

Thanks in advance! Any ideas will be highly appreciated!

Best regards,
Mihails

Re: pvcreate error: damaged disk?

Pedro Sousa — Tue, 10 Apr 2001 15:54:52 GMT

perform the following:
dd if=/dev/rdsk/c0t5d0 of=/dev/null bs=xxxx
(bs is the block size)
it should give something like this:
184436+0 records in
184436+0 records out

if it doesn't, then maybe you have an hw error.
good luck.

Re: pvcreate error: damaged disk?

Wieslaw Krajewski — Tue, 10 Apr 2001 16:14:28 GMT

Hi,

Try the mediainit command that reinitialize disk.
Takes some time but helps.

Re: pvcreate error: damaged disk?

melvyn burnard — Wed, 11 Apr 2001 07:07:05 GMT

From your posting it seems that dd is sometimes failing with an I/O error. That is a fairly certain sign that the disk is not good, if all other discs on the same interface are not experiencing problems.

Re: pvcreate error: damaged disk?

Edward Sedgemore — Wed, 11 Apr 2001 07:19:44 GMT

DD reporting an error means there is a problem with the filesystem on the disk, not necessarily the disk itself. May only be a bad block which needs to be remapped in order for it to be usable.

On a PC you would run a low-level formatter to remap all the bad blocks and make it useable. On HP-UX use the mediainit command to do the low level format. Only if mediainit fails then the disk is no good.

Re: pvcreate error: damaged disk?

Vincenzo Restuccia — Wed, 11 Apr 2001 08:15:15 GMT

Try with pvcreate -f /dev/rdsk/c0t4d0

Re: pvcreate error: damaged disk?

Cheryl Griffin — Wed, 11 Apr 2001 10:16:42 GMT

I agree with a few statements here.
Use dd to wipe out the disk, overwrite the disk header. Also the pvcreate -f to force the writing of the header are good.

One thing to note about mediainit, it works for HP disks. If your disk is a 3rd party disk it may/maynot work. Simply put, there is no guarantee it will work. Check with your vendor, they may have some formatter to use instead.

Re: pvcreate error: damaged disk?

Celso Medina Kern — Wed, 11 Apr 2001 13:13:02 GMT

Hi,

If dd fails with i/o error reading from or writing to the disk it means your it is damaged. You can confirm it if you have Support Tool Manager installed in this system. Run `mstm` - Menu tools, run, utility, select logtool with spacebar, ok.
In logtool, select view menu, formatted log, choose dir to write it, ok. After formatting it, you can check if there are hardware errors logged from your disk. It is identified by its hardware path. Issue an `lssf /dev/dsk/` to find it.
If you have an HP hardware support agreement, You can ask a Customer Engineer to do that for you.

Re: pvcreate error: damaged disk?

Jim Moffitt_1 — Wed, 11 Apr 2001 13:17:39 GMT

I agree with Vincenzo, the -f option should force the creation of this disk.

Re: pvcreate error: damaged disk?

Massimo_20 — Tue, 08 Oct 2002 14:02:27 GMT

I'm not agree with Vincenzo because if you have a disk damage the -f option doesn't work.
For me, is best to check the disk with the dd command.