topic Re: stty kill ^U doesn't work in Operating System - HP-UX

stty kill ^U doesn't work

Carol Livingston — Fri, 21 Jun 2002 17:56:44 GMT

I have a user that has his stty kill set to ^U, but it doesn't work. He also has set -o vi set on. I use set -o emacs and also have stty kill set to ^U and mine works fine. When I set -o vi, then ^U ceases to work. Is there any why to get this to work?

thanks
Carol

Re: stty kill ^U doesn't work

PIYUSH D. PATEL — Fri, 21 Jun 2002 18:23:46 GMT

Hi,

Are you trying a telnet from PC ??

Anyway, for setting it to ^U

#stty kill '^U'

( use the key besides enter- ', then Shift-6 and then Shift-u to get '^U' )

Then type
#stty -a
to find out that the settings have been activated. Check whether ^U is not used by anything. If it works then you can put this in the users .profile.

Piyush

Re: stty kill ^U doesn't work

Sanjay_6 — Fri, 21 Jun 2002 19:30:15 GMT

Hi,

Are the shell differnet between the two user id's. The one for which it works and the other for which it doesn't.

Hope this helps.

Regds

Re: stty kill ^U doesn't work

PIYUSH D. PATEL — Fri, 21 Jun 2002 19:35:57 GMT

Hi,

Are you using a dumb terminal with a serial cable, or are you using a terminal emulator on a PC ?

Are you using telnet to connect or are you using Xwindows?

If you are using Xwindows the it bypasses /etc/profile, /etc/csh.login, .profile, .kshrc, etc...

So what is the difference between the settings from your terminal and the other users terminal. May be different shells also.

Piyush