topic /var/stm/logs/sys/activity_log in Operating System - HP-UX

/var/stm/logs/sys/activity_log

kholikt — Tue, 28 May 2002 01:02:20 GMT

Hi,

I have a server with /var/stm/logs/sys
growing fast. Inside the log I only see some useless message

`$/var/stm/data/uut_status0`$/var/stm/data/uut_status0`$/var/stm/data/uut_status0`$/var/stm/data/uut_status0`$/var/stm/data/uut_status0`$/var/stm/data/uut_status0`$/var/stm/data/uut_status0`$/var/stm/data/uut_status0`$/var/stm/data/uut_status0`$/var/stm/data/uut_status0
Is there any patches for stm? Where can I download the stm related patches?

Re: /var/stm/logs/sys/activity_log

Michael Tully — Tue, 28 May 2002 01:34:19 GMT

Hi,

The latest patches are as follows:

10.20 PHSS_23654
11.00 PHSS_26944
11.11 PHSS_26417 (11i)

http://us-support2.external.hp.com/common/bin/doc.pl/distrib_redir=1+985580381|*
Select individual patches, you will then be prompted to login. Select HP-UX and follow the prompts or simply type in the patch numbers.

~Michael~

PS Please make sure that you award points to people who help you. Your record in this area is not good. Remember that people in the forums assist others for free using their own time and resources. Please take the courtsey of awarding points for their efforts.

Re: /var/stm/logs/sys/activity_log

S.K. Chan — Tue, 28 May 2002 01:54:35 GMT

Restarting diagnostics usually get rid of this messages. I do not know what causes it, as I can recall installing the latest STM related patches should help too. Do this and then monitor if the messages do come back ..
# /etc/opt/resmon/lbin/monconfig
==> select "K" to kill the monitor process
# /sbin/init.d/diagnostic stop
# /sbin/init.d/diagnostic start
==> retart diagnostics
# /etc/opt/resmon/lbin/monconfig
==> select "E" to enable it back