FTP security

Chris C. Guevarra — Thu, 19 May 2005 02:19:16 GMT

I only want one user to be able to use ftp.

How can I limit the use of ftp on a particular server?

Re: FTP security

Naveej.K.A — Thu, 19 May 2005 02:28:38 GMT

Hi,

Use ftpaccess.

man 4m ftpaccess for more details.

Regards,
Naveej

Re: FTP security

Indira Aramandla — Thu, 19 May 2005 02:29:13 GMT

Hi chris,

To allow one a particular user to use ftp you do like this

a) Create /etc/ftpusers file
b) Add the login id of the user you wanted to deny the ftp access.

For Hosts you can use inetd.sec file to allow or deny the access to ftp on your machine.

IA

Re: FTP security

Joseph Loo — Thu, 19 May 2005 02:34:58 GMT

hi,

consider ftpaccess:

http://docs.hp.com/en/B2355-90685/ch02s07.html?btnPrev=%AB%A0prev

http://docs.hp.com/en/B2355-90685/ch02s08.html?btnNext=next%A0%BB

and to restrict user to their home directory:

http://www1.itrc.hp.com/service/cki/docDisplay.do?docLocale=en_US&docId=200000062903488

u may also refer to these steps:

1. Configure the ftpaccess file:

a. cd /etc/ftpd
b. cp -p /usr/newconfig/etc/ftpd/ftpaccess
c. vi ftpaccess. At the bottom of the file there is a guestgroup
directive 'guestgroup ftponly'.

i. Either change that group designation to one you already
have or keep that designation.
ii. If you are keeping the ftponly group, then create that
group on your system.

2. Modify the /etc/inetd.conf file to enable the use of the ftpaccess
file:

a. vi /etc/inetd.conf
b. Add the -a flag to the ftp daemon.
c. ftp stream tcp nowait root /usr/lbin/ftpd ftpd -a -l

3. Make inetd re-read its configuration:

inetd -c

4. Create a bogus shell for users that will only have FTP access to
the system:

a. vi /usr/bin/ftpshell
b. exit 0
c. chmod 555 /usr/bin/ftpshell
d. chown bin:bin /usr/bin/ftpshell

5. Create an /etc/shells file:

a. vi /etc/shells
b. Include these lines in the file:

/sbin/sh
/usr/bin/ksh
/usr/bin/sh
/usr/bin/csh
/usr/bin/rsh
/usr/bin/rksh
/usr/bin/keysh
/bin/sh
/bin/ksh
/bin/csh
/bin/rsh
/bin/rksh
/usr/bin/ftpshell

6. Now add a user to the system. Use a group that is 'ftponly' and
make the user's shell /usr/bin/ftpshell.

7. Use SAM to limit the user to his home directory by setting up the
directory in this form:

/home/username/./

Note: The /./ is the important key here. When the ftpd verifies a
user's login, it checks and sees that the user is a member of
the 'guestgroup' ftponly. It then examines the home directory
and, if it sees a /./ in the path, it will then perform a chroot
to that directory. Therefore, when that user FTPs into the
system, their home directory will appear as the / directory.

8. Provide the user with an ls command:

a. cd /home/username
b. mkdir usr
c. mkdir usr/bin
d. cp -p /sbin/ls usr/bin
e. chown -R bin:bin usr
f. chmod -R 555 usr

if the user runs the ftp from only a particular host, u may restrict using /var/adm/inetd.sec.

regards.

Re: FTP security

Hoang Chi Cong_1 — Thu, 19 May 2005 02:38:41 GMT

Hi

The most simply is setting in the inetd.sec file (under /var/adm/inetd.sec)
You just specific which IP address can ftp to your server by adding one line in the inetd.sec file:

ftp allow

then :
#inetd -c
While add this line, by default ONLYthe listed IP can ftp to your server!

Hope this helps
Regard,
Hoang Chi Cong

Re: FTP security

Chris C. Guevarra — Thu, 19 May 2005 22:59:40 GMT

Thanks guys

topic Re: FTP security in Operating System - HP-UX

FTP security

Re: FTP security

Re: FTP security

Re: FTP security

Re: FTP security

Re: FTP security