topic Software installation in Operating System - HP-UX

Software installation

Tonny Sejr Kromann — Mon, 28 Feb 2005 05:44:23 GMT

Hi
I'm trying to install B3901BA HP C/ANSI C Developer's Bundle (S800).

When I try to retrieve the codeword I get:

The following error(s) occured:
The media part-number you entered is not valid. Please check it and enter a new one or choose one media part-number from the list above.

I tried all numbers for the June application cd's, with no luck (5013-2238 ...)
This worked fine with the aC++ which I installed successfully. Perhaps C/Ansi C is not on the Application cd's? Where would it be then?

--
Best regards
Tonny

Re: Software installation

Ravi_8 — Mon, 28 Feb 2005 06:01:36 GMT

Hi,

It will be application CD only.

check the /var/adm/sw/.codewords file, propably wrong entry (of codeword) for C compiler

Re: Software installation

Tonny Sejr Kromann — Mon, 28 Feb 2005 06:06:43 GMT

I was trying to get the codeword online. To get the codeword I must enter media part-number. The application media part numbers I have entered, has been rejected on licensing.hp.com. This error is generated:

The following error(s) occured:
The media part-number you entered is not valid. Please check it and enter a new one or choose one media part-number from the list above.

So I do not get to the actual installation at this point.

--
Best regards
Tonny

Re: Software installation

Ravi_8 — Mon, 28 Feb 2005 07:19:44 GMT

Hi

since you are telling that you could install aC++, even the aC also will be in the same CD (swlist -l fileset|grep -i compiler, need to mount the CD). If you still couldn't get contact HP