https://community.hpe.com/t5/operating-system-hp-ux/cxperf/m-p/3481713#M846041 Hi, cxperf has been obsoleted for a while.<BR />You should be using either <BR />- traditional gprof.<BR />- prospect.<BR />- rational quantify ($$).<BR /><BR />When you are on IPF, go to caliper (killerapp).<BR /><BR />-Cyrille<BR /> Tue, 08 Mar 2005 05:51:45 GMT MAUCCI_2 2005-03-08T05:51:45Z https://community.hpe.com/t5/operating-system-hp-ux/cxperf/m-p/3481711#M846039 HEllo,<BR /><BR />I have HP-UX 11.i over PA-RISC , 64 bits . I am searching for Cxperf or any utility similar to this one . <BR /><BR />Please give me your suggestions. Wed, 09 Feb 2005 02:57:06 GMT https://community.hpe.com/t5/operating-system-hp-ux/cxperf/m-p/3481711#M846039 jpcast_real 2005-02-09T02:57:06Z https://community.hpe.com/t5/operating-system-hp-ux/cxperf/m-p/3481712#M846040 Hi,<BR />cxperf is an additional product (chargeable) and if installed should be in /opt/cxperf.<BR />As an alternative how about 'prospect' at <A href="http://www.hp.com/go/prospect." target="_blank">http://www.hp.com/go/prospect.</A><BR />Regards Wed, 09 Feb 2005 03:13:26 GMT https://community.hpe.com/t5/operating-system-hp-ux/cxperf/m-p/3481712#M846040 Peter Godron 2005-02-09T03:13:26Z https://community.hpe.com/t5/operating-system-hp-ux/cxperf/m-p/3481713#M846041 Hi, cxperf has been obsoleted for a while.<BR />You should be using either <BR />- traditional gprof.<BR />- prospect.<BR />- rational quantify ($$).<BR /><BR />When you are on IPF, go to caliper (killerapp).<BR /><BR />-Cyrille<BR /> Tue, 08 Mar 2005 05:51:45 GMT https://community.hpe.com/t5/operating-system-hp-ux/cxperf/m-p/3481713#M846041 MAUCCI_2 2005-03-08T05:51:45Z