topic Re: Remove patch in Operating System - HP-UX

Remove patch

O'lnes — Thu, 26 Sep 2002 10:10:03 GMT

Our system install some patch previously, I think some of them is too old, how can I know which of them is useless and how to remove cos I want to free some space ? Thanks.

Re: Remove patch

steven Burgess_2 — Thu, 26 Sep 2002 10:15:35 GMT

Hi

You can use swremove and select the patch

HTH

Steve

Re: Remove patch

T G Manikandan — Thu, 26 Sep 2002 10:23:41 GMT

check this doc

http://www2.itrc.hp.com/service/cki/docDisplay.do?docLocale=en_US&docId=200000063210668

You can also use the 'cleanup' utility.

Thanks

Re: Remove patch

U.SivaKumar_2 — Thu, 26 Sep 2002 10:24:53 GMT

Hi,
#swlist -v | more
Note down the name of patches
Verify the function of the patch in this site.

If the patch is not needed. then
#swremove

regards,
U.SivaKumar

Re: Remove patch

James R. Ferguson — Thu, 26 Sep 2002 10:48:27 GMT

Hi:

Periodically, you should apply a current SupportPlus bundle. Use the Quality Pack Bundle (QPK) for 11.0. Use the GOLDQPK11i for 11.11. When you install these bundles, use the 'patch_match_target' SD option to select patches that match software installed on your host.

Before you apply a new bundle (e.g. every 6 months or so), run 'cleanup' to commit and remove superceded patches to which you will not be returning. If you want to think of these as the "old" patches, that's OK.

# cleanup -c 1

This will leave one level of a previous patch version available. Thus, if a newer version of a patch proves to be a problem, a 'swremove' of it will re-instate the "old" version. 'cleanup' will reclaim considerable space in the '/var/adm/sw' directory by removing predecessor versions of current patches. 'cleanup' will also trim the SD log files in 'var/adm/sw'. It is the *only* way that this directory should be managed. Do *not* manually remove files from here.

It is a good idea to create a current Ignite recovery tape before a patch installation.

Regards!

...JRF...

Re: Remove patch

Ravi_8 — Thu, 26 Sep 2002 11:07:03 GMT

Hi,

Patches hardly takes space, instead if you feel like replacing the old patches with new ones, then mount the latest Support plus CD then
#swinstall -x patch_match_target=true -s /cdrom

with this all the old patches are replaced with new ones.