topic Re: setting-up a remote printer in Operating System - HP-UX

setting-up a remote printer

Mark Greene_1 — Wed, 02 Jan 2002 20:45:03 GMT

Trying a different approach with my HP8100, I delete the setup I had on my system as a network connection to the jetdirect card, and tried to simply set it up as remote.

So I went into sam and did the delete, but when I do the add I get the message "remote printer "XXX (whose location is NAME on IP.ADDRESS.XXX)" already exists on this system"

I checked every file in /etc/lp and /var/spool/lp and there are no references to the original printer set-up. Does anyone know where lp is still getting the printer info that it sees the printer as previously existing? I've stopped and restared lpsched with the same results.

Ideally if I can find the file still retaining the reference, or the deamon running still holding the old info to restart, then I can continue with the remote printer setup.

thanks,
mark

Re: setting-up a remote printer

harry d brown jr — Wed, 02 Jan 2002 20:59:31 GMT

Mark,

have a look at this thread:

http://forums.itrc.hp.com/cm/QuestionAnswer/1,,0xe9f0d211e18ad5118ff10090279cd0f9,00.html

live free or die
harry

Re: setting-up a remote printer

Sanjay_6 — Wed, 02 Jan 2002 21:34:27 GMT

Hi Mark,

Try these links.

http://us-support3.external.hp.com/cki/bin/doc.pl/sid=7850997b024e88c67d/screen=ckiDisplayDocument?docId=200000057130739

http://us-support3.external.hp.com/cki/bin/doc.pl/sid=7850997b024e88c67d/screen=ckiDisplayDocument?docId=200000024631301

Hope this helps.

Regds

Re: setting-up a remote printer

Sanjay_6 — Wed, 02 Jan 2002 21:37:15 GMT

Hi Mark,

Try these links to add a netowrk printer,

http://us-support3.external.hp.com/cki/bin/doc.pl/sid=7850997b024e88c67d/screen=ckiDisplayDocument?docId=200000051772727

http://us-support3.external.hp.com/cki/bin/doc.pl/sid=0f44da930d88c937f0/screen=ckiDisplayDocument?docId=200000052049662

Hope this helps.

Regds

Re: setting-up a remote printer

Mark Greene_1 — Thu, 03 Jan 2002 15:23:01 GMT

Sanjay,

The first set of links you provided were exactly what was needed, thank you. I was able to setup the printer as remote and print to it. Of course, the problem I'm having is still there--4 blank lines between each line of text, plus now the staircase-affect due to the lack of any filtering on the Unix side.

The staircasing is not a surprise, but the 4 blank lines is telling me that either the default line-length on this is something over 300 characters, or I'm getting multiple lf/cr translations (i.e., additions) somewhere along the way.

Back to talk with the network group, I suppose...

mark

Re: setting-up a remote printer

Sanjay_6 — Thu, 03 Jan 2002 15:44:26 GMT

Hi Mark,

Try these links,

http://us-support3.external.hp.com/cki/bin/doc.pl/sid=a106fbb00f0fa0c0bb/screen=ckiDisplayDocument?docId=200000054869791

http://us-support3.external.hp.com/cki/bin/doc.pl/sid=a106fbb00f0fa0c0bb/screen=ckiDisplayDocument?docId=200000054300550

Hope this helps.

Regds