topic Re: syslog error message in Operating System - HP-UX

syslog error message

Jim Lynn — Fri, 17 Dec 2004 11:54:40 GMT

Where else can I find where this error is coming from in the syslog.log? I can't find what the hardware is writing this error....)
Dec 17 10:50:01 ubvlisp vmunix: Error Address : 0x5a8bca8
Dec 17 10:50:01 ubvlisp vmunix: Detected Low Priority Machine Check.
Dec 17 10:50:01 ubvlisp vmunix: LPMC type : SEDC (ECC-corrected single-bit error

Re: syslog error message

Sanjay_6 — Fri, 17 Dec 2004 11:59:05 GMT

Hi,

Looks like a memory problem. Check and see if there are more errors.

If you have cstm installed,try this,

echo 'selclass qualifier memory;info;wait;infolog' |cstm >/tmp/meminfo.txt

more meminfo.txt

If you see errors over there, open a hardware case with hp and get the memory module replaced.

Hope this helps.

Regds

Re: syslog error message

Jim Lynn — Fri, 17 Dec 2004 12:08:01 GMT

Didn't tell me much - what does this say?
Support Tools Manager

Version A.14.00

Product Number B4708AA

(C) Copyright Hewlett Packard Co. 1995-1996
All Rights Reserved

Use of this program is subject to the licensing restrictions described
in "Help-->On Version". HP shall not be liable for any damages resulting
from misuse or unauthorized use of this program.

cstm>selclass qualifier memory;info;wait;infolog

Exiting the STM UI due to an unexpected error.

Possible Causes:
Internal Application Error.
The UI Activity Log and/or the System Activity Log may contain
more detailed information. If possible, refer to those log files
for additional help.

Re: syslog error message

Sanjay_6 — Fri, 17 Dec 2004 12:12:57 GMT

Hi Jim,

you are using a very old version of STM. You need to get a newer version, preferably the latest. you can do this on the fly. Installing STM newer version does not involve a reboot.

The latest version of STM is A44.00 or above for 11.0 and above,

Try this link for the latest version of STM from hp software depot site,

http://software.hp.com/portal/swdepot/displayProductInfo.do?productNumber=B6191AAE

Hope this helps.

Regds

Re: syslog error message

Jim Lynn — Fri, 17 Dec 2004 12:17:16 GMT

Sorry - should have mentioned I am at 10.20 with no plans to go 11.0 due to sale of servers/company to another company but I am the sole supporter left over while transistion continues...

Re: syslog error message

Sanjay_6 — Fri, 17 Dec 2004 12:42:22 GMT

Hi Jim

Try this link,

http://h10025.www1.hp.com/ewfrf/wc/genericSoftwareDownloadIndex?lc=en&cc=us&softwareitem=wk141en

Hope this helps.

Regds