topic Re: How do I enable large filesystems. in Operating System - HP-UX

How do I enable large filesystems.

Angela Shepherd — Mon, 30 Sep 2002 12:36:17 GMT

Can I modify a filesystem to allow large files without unmounting the filesystem.

Re: How do I enable large filesystems.

Pete Randall — Mon, 30 Sep 2002 12:40:52 GMT

Hi,

Use fsadm:

fsadm -F hfs -o largefiles /dev/vg02/lvol1

Pete

Re: How do I enable large filesystems.

James R. Ferguson — Mon, 30 Sep 2002 12:44:32 GMT

To enable largefile support on an *existing* filesystem you need to unmount the filesystem if you do not have Online JFS and/or the filesystem isn't VxFS. To enable the support, use the raw device file:

# fsadm -F vxfs -o largefiles /dev/vgXX/rlvolY

The conversion takes just a few seconds.

To see if largefiles support is enabled or disabled for a filesystem, do:

# fsadm -F vsfs /mountpoint

Regards!

...JRF...

Re: How do I enable large filesystems.

Keely Jackson — Mon, 30 Sep 2002 12:45:33 GMT

Hi

You can enable large filesystems with the following:

fsadm -F hfs -o largefiles /dev/vgxx/lvoln

use -F vxfs if your filesystem is vxfs.

If you have on-line jfs you won't need to unmount your file system.

Cheers
Keely

Re: How do I enable large filesystems.

Tom Maloy — Mon, 30 Sep 2002 12:58:05 GMT

And after you modify it, don't forget to add that option to the entry in /etc/fstab:

/dev/vg20/lvol2 /mnt_point vxfs largefiles,delaylog 0 2

Re: How do I enable large filesystems.

Angela Shepherd — Mon, 30 Sep 2002 13:01:46 GMT

Can I do this throug SAM or do I have to use the fsadm command.

Re: How do I enable large filesystems.

Leif Halvarsson_2 — Mon, 30 Sep 2002 13:03:33 GMT

Hi

Or you can use SAM to do this more user-friendly.

Re: How do I enable large filesystems.

Leif Halvarsson_2 — Mon, 30 Sep 2002 13:18:10 GMT

Sorry,
I wrote my reply before your question.
Yes you can use SAM for this. Select Disk and Filesystems, then Filesystems, select the filesystem you want to modify and then Actions/Modify. Then select Allow large files.

Re: How do I enable large filesystems.

fg_1 — Mon, 30 Sep 2002 13:21:24 GMT

Hi Angela

You can do it either thru cmd line: (more prefered Method)

fsadm -F (vxfs or hfs) -o largefiles /dev/vg##/lvol##

or thru sam:

Select: Disk and Filesystems
Select: Filesystems
Select: Filesystem you want to modify.
Select: Actions/Modify.
Select: Select Allow large files.

Gl

Re: How do I enable large filesystems.

Angela Shepherd — Mon, 30 Sep 2002 14:20:20 GMT

Thank you. I used SAM and didn't have to umount the filesystem. Please close this issue.

Re: How do I enable large filesystems.

MANOJ SRIVASTAVA — Mon, 30 Sep 2002 14:21:12 GMT

Also Angela

if you run

mkfs -m /dev/vg00/lvol1 you can know with what options the filesystem was created

Manoj Srivastava

Re: How do I enable large filesystems.

Stephen Serbe — Tue, 01 Oct 2002 19:56:55 GMT

FYI... I had the same question yesterday, but I performed a search with a couple of the keywords and found very similar answers. The search facility on this web site is very helpful! Thanks everybody for the contributions!