topic Install Problems in Operating System - HP-UX

Install Problems

Tim J. Arland — Thu, 04 Oct 2001 02:43:00 GMT

Installing HP-UX 11.00 on a 715/100. "utime error" messages, installation aborts. Any thoughts? Thanks.

Re: Install Problems

Sanjay_6 — Thu, 04 Oct 2001 03:00:01 GMT

Hi Tim,

Have a look at this thread for more info.

http://us-support.external.hp.com/cki/bin/doc.pl/sid=4169aa07160295936e/screen=ckiDisplayDocument?docId=200000014667743

hope this helps.

Thanks

Re: Install Problems

linuxfan — Thu, 04 Oct 2001 03:08:30 GMT

Hi Tim,

Are you doing a cold install or an upgrade?

when are you seeing these errors?

The thread Sanjay mentioned is talking about the ignite but is the date on your system ok?

-Ramesh

Re: Install Problems

Tim J. Arland — Thu, 04 Oct 2001 03:22:02 GMT

Ramesh:

This is a cold install - OS is installed, but I don't know any passwords, etc.

Is there a way to check or change the date before installing the OS?

Thanks

Re: Install Problems

linuxfan — Thu, 04 Oct 2001 03:28:47 GMT

Hi Tim,

If you are doing a cold install, you don't need to know any passwords nor change the date, because during a cold install, you boot off of the Core-OS CD and install the OS and during this process, it overwrites EVERYTHING on your root disk.

How were you trying to install the OS?

-Ramesh

Re: Install Problems

Sanjay_6 — Thu, 04 Oct 2001 04:05:35 GMT

Hi Tim,

I believe if you doing an interactive install, you get to see the current time and date and modify the same. This should be in the NEtowrk configuration setup i think, the section where you define the server name and ip address. This is the third section where you det the different parameters during the installation procedure.

Thanks

Re: Install Problems

Tim J. Arland — Thu, 04 Oct 2001 11:32:51 GMT

Ramesh:

I am doing a cold install: I'm booting from and 11.00 core os cd. Still getting the utime error.

Re: Install Problems

Reid Orsten — Thu, 25 Oct 2001 01:36:12 GMT

I had this problem a bit ago with an old HPPA like you're using, the cause is that the little battery on the motherboard is dead, so the clock is way off: check the date in boot_admin and you'll probably see 2038. Set the date properly before you boot and it will install properly. I have not seen the old boot_admin prompt recently so I can't give more details.

Re: Install Problems

Ravi_8 — Thu, 25 Oct 2001 06:39:16 GMT

Hi, Tim
could you change the os CD and restart the installation.