topic Re: signal 11 error during compilation in Operating System - HP-UX

signal 11 error during compilation

T G Manikandan — Thu, 18 Oct 2001 10:36:33 GMT

Hello,
I get a signal 11 error during compilation.
i have attached the ouput.
Can someone help me reg. this?

Thanks
G Manikandan

Re: signal 11 error during compilation

David Lodge — Thu, 18 Oct 2001 10:57:55 GMT

IIRC signal 11 is a Segment Violation, and the display looks like a stack rollback...

My advice:
1) Check patches
2) Contact HP support...

dave

Re: signal 11 error during compilation

A. Clay Stephenson — Thu, 18 Oct 2001 15:58:20 GMT

Hi:

The notes for Patch PHSS_20975 have an error noted very much like yours. I would install this cumulative aCC patch.

Clay

Re: signal 11 error during compilation

Wodisch — Thu, 18 Oct 2001 16:23:30 GMT

Hello,

how about increasing your kernel's MAXDSIZ and MAXSSIZ?
Large compiles/links usually bark at those!

HTH,
Wodisch

Re: signal 11 error during compilation

T G Manikandan — Fri, 19 Oct 2001 03:21:23 GMT

Hello,
Clay and Woodish,thanks for the replies.
I will try them out.
Sorry for not assigning a full 10 as if I it becomes a maagical answer and the call is closed.
Thanks a lot.
BYe

Re: signal 11 error during compilation

T G Manikandan — Mon, 22 Oct 2001 04:28:13 GMT

Hello,
Still the problem is not resolved.
I am getting the same error.
The patch is already installed.
The MAXDSIZ and MAXSSIZ parameters are set to the maximum.
Can someone help?

Re: signal 11 error during compilation

Network Servers — Thu, 25 Oct 2001 17:30:39 GMT

This is a segmentation fault which can be caused by trying to access and array out of bounds. Pointer arithmetic errors are common in c or C++