topic Re: sar -d in Operating System - HP-UX

sar -d

fanyong — Thu, 27 Sep 2001 05:14:17 GMT

hi,exports

The command "sar -d 5 5" reports nothing
the result is:
14:10:59 device %busy avque r+w/s blks/s avwait avserv
14:11:04
14:11:09
14:11:14
14:11:19
14:11:24
Thanks

Re: sar -d

Michael Tully — Thu, 27 Sep 2001 05:30:29 GMT

Hi,

What O/S version 10.20 11 ?
# uname -a

What patch level are you on?
# swlist -a revision | grep XSWGR

How many disks are in your system?

Gives us something to start with, as there
certainly seems to be a problem with the
'sar' program itself.

-Michael

Re: sar -d

Paula J Frazer-Campbell — Thu, 27 Sep 2001 06:02:12 GMT

Hi
Try another sar command i.e.

sar -c 5 5

Does that give an output.

Paula

Re: sar -d

Anne-Marie LABRUNE — Thu, 27 Sep 2001 07:30:15 GMT

Hi,
It seems that, on my systems running HP-UX 11.0, whenever ther is NO activity on disks, 'sar -d' gives no answer...
Try 'iostat 5 5' which seems to be more verbose.
HTH

Re: sar -d

Animesh Chakraborty — Thu, 27 Sep 2001 07:53:45 GMT

Hi,
It is normal..
If there is no activity on device it will show blank.
Man page of sar also confirms that
"-d Report activity for each block device, e.g., disk or tape
drive. One line is printed for each device that had
activity during the last interval. If no devices were
active, a blank line is printed."

Hope this is clear
Regards
Animesh