https://community.hpe.com/t5/operating-system-hp-ux/hp-us-10-20-and-raid5-partitions/m-p/2586114#M856452 Hi,<BR />I have a 9000/D210 running HP-UX 10.20. We have<BR />a Raid5 subsystem attached to it (/dev/dsk/c3t1d0). We have just added a new set of disks to the Raid5 as a new partition. This partition should appear to the host as a different disk drive. When I booted, ioscan did not detect this new partition.<BR />Does someone knows why? <BR />Thanks in advance<BR /><BR />Narimane<BR /><BR /> Thu, 27 Sep 2001 14:10:46 GMT Guettache 2001-09-27T14:10:46Z https://community.hpe.com/t5/operating-system-hp-ux/hp-us-10-20-and-raid5-partitions/m-p/2586114#M856452 Hi,<BR />I have a 9000/D210 running HP-UX 10.20. We have<BR />a Raid5 subsystem attached to it (/dev/dsk/c3t1d0). We have just added a new set of disks to the Raid5 as a new partition. This partition should appear to the host as a different disk drive. When I booted, ioscan did not detect this new partition.<BR />Does someone knows why? <BR />Thanks in advance<BR /><BR />Narimane<BR /><BR /> Thu, 27 Sep 2001 14:10:46 GMT https://community.hpe.com/t5/operating-system-hp-ux/hp-us-10-20-and-raid5-partitions/m-p/2586114#M856452 Guettache 2001-09-27T14:10:46Z https://community.hpe.com/t5/operating-system-hp-ux/hp-us-10-20-and-raid5-partitions/m-p/2586115#M856453 Hummm....<BR /><BR />Sounds like you need to configure the subsystem. Did you create a new lun on the subsystem. It might help if you specified the type of subsystem it is.<BR /><BR />...jcd... Thu, 27 Sep 2001 14:49:09 GMT https://community.hpe.com/t5/operating-system-hp-ux/hp-us-10-20-and-raid5-partitions/m-p/2586115#M856453 Joseph C. Denman 2001-09-27T14:49:09Z