topic Re: Can't Install Oracle 8.0.6 in Operating System - HP-UX

Can't Install Oracle 8.0.6

Christopher McCray_1 — Thu, 30 Aug 2001 14:29:18 GMT

I have pfs mounted an oracle 8.0.6 CD for our dba group to install on a T-500 running 10.20 using the pfs mount instructions contained in document KBAN00000197 on the knowledge base. The dba tried to launch the install and received the following message:

oracle@dmc17% ./orainst
A problem occurred with the Oracle Installer. Try reinstalling it from distribution media. Or, you can provide the following message to Support to debug the problem:
User Interface Failure: Window System Startup
Result: User Interface Failure: Window System Startup

Can any of you experienced experts help? Thanks in advance.

Chris

Re: Can't Install Oracle 8.0.6

John Poff — Thu, 30 Aug 2001 14:45:43 GMT

Hello,

I remember from some installations the DBAs did here recently that the newer versions of the Oracle install program "orainst" can only run from an XWindows session. The program used to run either in XWindows or from a character based display (telnet), but they dropped the character based support.

Try logging in to XWindows and running orainst.

JP

Re: Can't Install Oracle 8.0.6

Christopher McCray_1 — Thu, 30 Aug 2001 15:40:33 GMT

We have already tried that. Besides, I believe the GUI-only install started with 8.1.7 and we have already successfully installed on a I70 w/10.20. Thanks for your help and if you have anything else, please, I'm all ears.

Chris

Re: Can't Install Oracle 8.0.6

Praveen Bezawada — Thu, 30 Aug 2001 15:45:54 GMT

Hi
We had a similar problem when installing 8.0.5, the TERM was not set correctly and the installer just wouldn't come up.

...BPK...

Re: Can't Install Oracle 8.0.6

Sridhar Bhaskarla — Thu, 30 Aug 2001 15:57:08 GMT

Two things

-Clear your display

export DISPLAY=""

-Make sure your clear command works. If not,
set your TERM till you get your clear working.

export TERM=hp (or vt220 or whatever)

If both are done, you should be ok.

-Sridhar

Re: Can't Install Oracle 8.0.6

Wodisch — Thu, 30 Aug 2001 19:07:45 GMT

Hello Christopher,

the X-Windows based install started with Oracle 8.1.x,
so that would not be your problem. But just to exclude
even the slightest chance, do an "unset DISPLAY", first
(the export DISPLAY="" does not work).

Next, Oracle does NOT use the standard TERMINFO
sequences, nor the $TERM environment variable,
they use $ORACLE_TERM, and they do not accept
values like "dtterm", you will have to use "vt220"
in an dtterm-window (or "hp" in an hpterm-window)!

Now you should be fine - try again.

HTH,
Wodisch

Re: Can't Install Oracle 8.0.6

Christopher McCray_1 — Thu, 30 Aug 2001 19:49:43 GMT

Sorry to send you guys chasing after this one; it appeared to be a bad cd in which the vtxxx.res files were truncated (i.e vt100.res was vt1.res, etc) I popped in a new cd and it worked. Thanks for all your support.