topic Re: Error at fbackup device selection in Operating System - HP-UX

Error at fbackup device selection

Vogra — Thu, 30 Aug 2001 19:12:00 GMT

Hi All!
when I select backup device I get de msg error: "SAM internal error.
The error handler has gotten the error code 1 of type NOTE with the
associated strings:
0/0/1/0.3.0
QUANTUM DLT8000"
I tested some procedures and get some warnings at root mail. Please, See attached file.

Re: Error at fbackup device selection

James R. Ferguson — Thu, 30 Aug 2001 19:31:57 GMT

Hi Claudio:

Well, from 'fbackup's advisory, the tape had not last been used by 'fbackup'. That is, either it was a new tape or one that had been used by something other than 'fbackup'.

This warning, in and of inself, is sufficient to yield a return code = 4. Other reasons for the return code are files whose modification timestamp change from the point 'fbackup' starts their copy until it finishes them. In this case the file is (re)copied 'maxretries' times [default = 5] with a warning message generated each time.

Regards!

...JRF...

Re: Error at fbackup device selection

Vogra — Thu, 30 Aug 2001 19:45:36 GMT

Hi James,
If I did understand, making another fbackup procedure this error could not occur...(right me if I wrong, please). well, I'm using SAM and in the next try, I get the msg attached.

The server is a A500(HPUX-11.00) and the tape is a DLT-8000.

Thanx.

Re: Error at fbackup device selection

James R. Ferguson — Thu, 30 Aug 2001 20:09:59 GMT

Hi Claudio:

You need to get SAM patch PHCO_23876 from the ITRC patch database and install it. This will fix the DLT8000 error SAM is reporting. A reboot is *not* required to install this patch.

The 'fbackup' return code = 4 will be returned for any tape that was not *last* used by 'fbackup'. This is the message: "WARNING: unable to read a volume header".

Regards!

...JRF...