SD+DS2300 scsi bus errors

Stefan FLOREA — Fri, 19 Nov 2004 02:39:19 GMT

Hi Guys,

Although I found many threads on the DS2300 subject, I could not recognize mine: 4 x SD partitions connected to 2 x DS2300 boxes in split bus mode. P1 and P2 share one half-bus, P3 and P4 share the other one. The second DS2300 is a mirror of the first. Ultra2 SCSI HBA are used. The problems is that tons of scsi bus resets occur one all DS2300 buses. Is that multi-initiator setup supported?
tnx,Stefan

Re: SD+DS2300 scsi bus errors

Ivajlo Yanakiev — Fri, 19 Nov 2004 02:55:09 GMT

hi
Did you change SCSI id on second scsi controler

If you use 2 SCSI CRTL you need to change one of them. All CTRL have default SCSI ID 7
Also do not use ioscan on 2 server in same time.
usefull link :
http://forums1.itrc.hp.com/service/forums/questionanswer.do?admit=716493758+1100850810552+28353475&threadId=234969

topic Re: SD+DS2300 scsi bus errors in Operating System - HP-UX

SD+DS2300 scsi bus errors

Re: SD+DS2300 scsi bus errors