https://community.hpe.com/t5/operating-system-hp-ux/setprivgrp-dba-mlock/m-p/2516874#M870851 I have used setprivgrp to set the MLOCK privilege for the dba group. After rebooting the server the MLOCK privilege is not set anymore. Is there a standard or recommended method for assigning special privileges to groups at system startup? Do I just need to put an entry in /etc/privgroup ? Fri, 13 Apr 2001 07:44:58 GMT Jim Mulshine 2001-04-13T07:44:58Z https://community.hpe.com/t5/operating-system-hp-ux/setprivgrp-dba-mlock/m-p/2516874#M870851 I have used setprivgrp to set the MLOCK privilege for the dba group. After rebooting the server the MLOCK privilege is not set anymore. Is there a standard or recommended method for assigning special privileges to groups at system startup? Do I just need to put an entry in /etc/privgroup ? Fri, 13 Apr 2001 07:44:58 GMT https://community.hpe.com/t5/operating-system-hp-ux/setprivgrp-dba-mlock/m-p/2516874#M870851 Jim Mulshine 2001-04-13T07:44:58Z https://community.hpe.com/t5/operating-system-hp-ux/setprivgrp-dba-mlock/m-p/2516875#M870852 Besides putting the entry in /etc/privgroup, verify that /sbin/init.d/set_prvgrp exists and is executable and that the following symlink exists:<BR /><BR />/sbin/rc1.d/S400set_prvgrp -&gt; /sbin/init.d/set_prvgrp Fri, 13 Apr 2001 20:56:55 GMT https://community.hpe.com/t5/operating-system-hp-ux/setprivgrp-dba-mlock/m-p/2516875#M870852 Allen T. Mullen 2001-04-13T20:56:55Z