topic Cold installing 11 over 10.20 in Operating System - HP-UX

Cold installing 11 over 10.20

Kevin_107 — Fri, 11 Oct 2002 09:24:07 GMT

Has any had any problems with Hardware after cold installing 11, Anything to look out for ?!?!

Re: Cold installing 11 over 10.20

Paula J Frazer-Campbell — Fri, 11 Oct 2002 09:33:35 GMT

Hi

Be careful with Fibbe cards as 11i will not support the earlier cards.

Paula

Re: Cold installing 11 over 10.20

Paula J Frazer-Campbell — Fri, 11 Oct 2002 09:34:03 GMT

Hi

Be careful with Fibre cards as 11i will not support the earlier cards.

Paula

Re: Cold installing 11 over 10.20

Clemens van Everdingen — Fri, 11 Oct 2002 09:39:35 GMT

Hi,

Also check if the installed HW needs special driver software.
Indeed for example the Lan cards like Paula mentioned, but another example is MUX EISA/PCI drivers etc.

Also first install the OS, and then the drivers. Do not select the drivers during the install phase.

This all is depending on the HW we are talking about. (model etc.)

C.

Re: Cold installing 11 over 10.20

T G Manikandan — Fri, 11 Oct 2002 10:24:52 GMT

check this document before doing an update or cold install.
This document is for 9000 series

http://docs.hp.com/hpux/pdf/5971-0623.pdf

Thanks

Re: Cold installing 11 over 10.20

T G Manikandan — Fri, 11 Oct 2002 10:26:56 GMT

I think this is what you were looking for

http://www.hp.com/workstations/products/unix/operating/hpux11/cookbook/cookbook.html