topic Re: No GUI display in Operating System - HP-UX

No GUI display

Bill Pontius — Thu, 28 Jun 2001 11:49:03 GMT

I have just done a cold install of 10.20 on a 10.20 c110 and now I donot get a GUI on my A2094A CRT.Message " Unable to initize or connect to the desktop messaging system. Check your $home /.dt/errorlog." At errorlog "dtsession: The Tool Talk session server (IT session couldnot be started. This indicicates either ToolTalk is not installed ot that it is not installed correctly on the machine.

Re: No GUI display

Vincenzo Restuccia — Thu, 28 Jun 2001 11:58:17 GMT

See http://www.dutchworks.nl/htbin/hpsysadmin?h=3&dn=68712&q=Unable%20to%20initi%7ae%20or%20connect%20to%20the%20desktop%20messaging%20system.%20Check%20your%20%24home%20%2f.dt%2ferrorlog.%22%20At&fh

http://www.dutchworks.nl/htbin/hpsysadmin?h=3&dn=31995&q=Unable%20to%20initi%7ae%20or%20connect%20to%20the%20desktop%20messaging%20system.%20Check%20your%20%24home%20%2f.dt%2ferrorlog.%22%20At&fh

Re: No GUI display

LB4 — Thu, 28 Jun 2001 14:26:41 GMT

Is your networking configured correctly ?
Are you able to ping?
Are you able to nslookup ?
Is /etc/hosts correct ?
Is /etc/rc.config.d/netconf correct ?

Re: No GUI display

Bill Pontius — Thu, 28 Jun 2001 17:36:02 GMT

Right after I got your reply, another guy changed some ip addresses and discovered that it fixed the display problem.