topic Re: swcopy question in Operating System - HP-UX

swcopy question

Rainer von Bongartz — Fri, 29 Jun 2001 07:48:38 GMT

I have about 25 patches to be installed
I dowloaded the patches, unpacked them and now have 25 .depot files to be installed.

I want to copy these depots to a directory using swcopy so that I can install all patches at one time.

I'm fighting with swcopy options to do this from the shell, as I don't want to use sam for this task.

Can anybody tell me how to do this ??

Re: swcopy question

Alex Glennie — Fri, 29 Jun 2001 07:55:51 GMT

# for i in PH*.depot
do
swcopy -s ${PWD}/$i \* @ /var/opt/ignite/Patches
done

Verify the contents of the depot using :
# swlist -d @ /var/opt/ignite/Patches

Re: swcopy question

Rainer von Bongartz — Fri, 29 Jun 2001 08:13:37 GMT

Thanks Alex, works fine

Re: swcopy question

Ravi_8 — Fri, 29 Jun 2001 08:14:50 GMT

Hi,
first you need to create a depot

here is the procedure:
assuming all your depot files are under /tmp
#mkdir /tmp/patch_depot
#swcopy -s /tmp/patch1_name.depot patch1_name @ /tmp/patch_depot

eg; for patch PHKL_16957
swcopy -s /tmp/PHKL_16957.depot PHKL_16957 @ /tmp/patch_depot
(repeat the same for all patches)
#swreg -l depot /tmp/patch_depot
#swinstall -s /tmp/patch_depot
after patch installation is over
#swreg -u -l depot /tmp/patch_depot.

This will install all your patches.

Re: swcopy question

Vincent Stedema — Fri, 29 Jun 2001 08:15:08 GMT

Hi,

Also, you might want to add the "-x enforce_dependencies=false" to the swcopy command supplied by Alex. Otherwise the swcopy will halt when some of the patches are dependent on one another and you will have to swcopy them in the correct order to resolve these dependencies.

Regards,

Vincent