topic Port mapper failure in Operating System - HP-UX

Port mapper failure

Klaus Grohal — Mon, 02 Jul 2001 08:39:59 GMT

if i try to recover with legato networker 5.5 i will get " port mapper failure" on a superdome sd32000 with hp-ux 11.11.
If i slow down the machine by putting a "tusc" on the networker-prozess, it works. Timing problems ??

Please help me!!

Re: Port mapper failure

Bill McNAMARA_1 — Mon, 02 Jul 2001 08:44:52 GMT

I'm just going to take a guess you're on Gigabit ethernet?

Can you figure out what rate the card is configure at?

Is there NFS mounts involved..

this is just because 11i has a few patches to synchronise to 11.00 level and I've heard of a few GB ethernet issues on superdome related to 11i.

Bill

Re: Port mapper failure

Klaus Grohal — Mon, 02 Jul 2001 09:17:10 GMT

Thanks for your reply,

a) i'm not on an giga-ethernet

b) the cards are set to 100 FD manual on both machines

c) there are no nfs-mounts

Re: Port mapper failure

Bill McNAMARA_1 — Mon, 02 Jul 2001 09:40:29 GMT

Hi Klaus,

Have you any other problems on the SD related to networking, I'd be surprised that you are seeing the errors when I don't and I'm on really old 11i releases.
I'd tend to suggest a s/w problem.. and would be looking for any application specific logging/patches.

Just in case there are issues related to your networking card, check out the following URL:
http://techsolutions.hp.com/fe/info_index.html

Later,
Bill