Problem on my MDserver

Bernard Bravo — Sat, 19 Jan 2002 16:12:40 GMT

Hi,

Anybody who can interpret these messages from syslog below.

Jan 19 20:02:23 mdserv ocd[1580]: (200) ERROR: Unable to obtain data from network: system error 4: Interrupted system call
Jan 19 20:02:23 mdserv ocd[1580]: (270) ERROR: System returned error 256 while disabling printer: system error 4
Jan 19 20:02:23 mdserv ocd[1580]: (299) ERROR: Closing connection due to error with data path
Jan 19 20:02:23 mdserv ocd[1580]: (297) ERROR: Removing pseudonym /dev/telnet/mkna3eir and closing pty /dev/ptym/ptyr6
Jan 19 20:02:23 mdserv ocd[1580]: (296) ERROR: Recreating pseudonym /dev/telnet/mkna3eir with new pty
Jan 19 20:02:36 mdserv ocd[1589]: (200) ERROR: Unable to obtain data from network: system error 4: Interrupted system call
Jan 19 20:02:36 mdserv ocd[1589]: (270) ERROR: System returned error 256 while disabling printer: system error 4
Jan 19 20:02:36 mdserv ocd[1589]: (299) ERROR: Closing connection due to error with data path
Jan 19 20:02:36 mdserv ocd[1589]: (297) ERROR: Removing pseudonym /dev/telnet/vcruz1eir and closing pty /dev/ptym/ptytb
Jan 19 20:02:36 mdserv ocd[1589]: (296) ERROR: Recreating pseudonym /dev/telnet/vcruz1eir with new pty
Jan 19 20:02:52 mdserv ocd[1597]: (200) ERROR: Unable to obtain data from network: system error 4: Interrupted system call
Jan 19 20:02:52 mdserv ocd[1597]: (270) ERROR: System returned error 256 while disabling printer: system error 4
Jan 19 20:02:52 mdserv ocd[1597]: (299) ERROR: Closing connection due to error with data path
Jan 19 20:02:52 mdserv ocd[1597]: (297) ERROR: Removing pseudonym /dev/telnet/bac1eir and closing pty /dev/ptym/ptysb
Jan 19 20:02:52 mdserv ocd[1597]: (296) ERROR: Recreating pseudonym /dev/telnet/bac1eir with new pty

------------------------------
we are current having problem on our lan connection.

when I check the lan0 the config are;

speed=100bt
autoneg=on
duplex=full

while in lan1 its;

speed=100
autoneg=off
duplex=half

I also encountered these message in SAM while Im in the Network Interface Card window at lan1.

"The driver specific script in /usr/sbin doesn't support the setting of Speed, Duplex and Autonegotiation parameters. Please obtain the latest configuration script or contact your support personnel for further assistance."

Hope some guro could help me on this.

thanks in advance.

bern

Re: Problem on my MDserver

Paula J Frazer-Campbell — Sat, 19 Jan 2002 16:56:44 GMT

Bernard

The ocd errors are from the outbound connection deamon is this connection via lan1?

Have you tried setting autoneg to "on" on this card as the terminal servers that the ocd is having problems with may be only 10 meg.

HTH

Paula

topic Problem on my MDserver in Operating System - HP-UX

Problem on my MDserver

Re: Problem on my MDserver