topic Re: PHSS_30022 error in Operating System - HP-UX

PHSS_30022 error

Achilles_2 — Wed, 19 May 2004 21:33:36 GMT

Hi all,

I have downloaded PHSS_30022 from HP offical website and installed in my server. But I found that there is an error after extracted.

My server is ia64 hp server rx2600 and OS is 11.23

/opt/hp_patch/30022 # tar tvf hpux_800_11.22_05190954.tar
rw-r----- 50/100 92 May 20 09:54 2004 patch_manifest
r--r--r-- 50/100 1780 Jun 15 05:49 2001 README_hp-ux
rwxr-xr-x 50/100 5608 May 20 09:54 2004 create_depot_hp-ux_11
rw-r--r-- 50/100 63255195 Jan 28 14:05 2004 PHSS_30022
Tar: error! blocksize changed

I tried to download other formats (zip, gzip) but it has the same result. Do you know what's happpen?

Thanks you for your attention!!

Alex

Re: PHSS_30022 error

Joseph Loo — Wed, 19 May 2004 21:43:51 GMT

hi,

you have downloaded the necessary files to create a software depot bundle.

the script, create_depot_hp-ux_11 will create a depot in the directory which you prefer and afterwhich run swcopy to that depot.

you may choose to run swinstall -s where you will see the software bundle.

regards.

Re: PHSS_30022 error

Achilles_2 — Wed, 19 May 2004 22:29:59 GMT

I think that the pasic patch has an error, it couldn't create the depot.
Here is the error message whent create depot:

root@GZDT-2:/opt/hp_patch/30022 # create_depot_hp-ux_11 PHSS_30022
DEPOT: /opt/hp_patch/30022/depot
BUNDLE: BUNDLE
TITLE: Patch Bundle
UNSHAR: y
PSF: depot.psf
Expanding patch shar files...
x - PHSS_30022.text
x - PHSS_30022.depot [non-ascii]
PHSS_30022[3582]: Syntax error at line 3586 : `<<' is not matched.
ERROR: Could not unshar PHSS_30022
list of SD installable patches =
No valid SD installable patch found. Exiting...

Re: PHSS_30022 error

Joseph Loo — Wed, 19 May 2004 22:42:15 GMT

try this:

#./create_depot_hp-ux_11 -i
or in this case
#/opt/hp_patch/30022/create_depot_hp-ux_11 -i
this will run the script in interactive mode.

regards.

Re: PHSS_30022 error

Achilles_2 — Wed, 19 May 2004 23:05:53 GMT

It has the same result.
I suspect that the source of patch is fault.

Re: PHSS_30022 error

Joseph Loo — Thu, 20 May 2004 00:30:32 GMT

just back from lunch.

i did not see the tar:error.

yes, you may need to download that patch again. if you decided to use the gzip, (i.e. hpux_800*.tgz), it will still be a compressed tar file. perform these steps after downloading the patch bundle.

# gunzip -d hpux_800*.tgz
# tar xvf hpux_800*.tar
# ./create_depot_hp-ux_11 -i
for non-interactive mode:
# ./create_depot_hp-ux_11

it should perform a swcopy and create a depot.

by the way, i will only use this if i am looking at a lot of patches. for one or 2 patches, just download the patch and

# sh PHXX_12345
this will unshare the patch files, to PHXX_12345.depot and PHXX_12345.text

you may then do a swinstall -s //PHXX_12345.depot

regards.

Re: PHSS_30022 error

Steven E. Protter — Thu, 20 May 2004 00:50:17 GMT

try the ftp script download option. That gives you an ftp script that will get the files.

Or, if its one patch, just get the patch.

sh PHSS_30022

swinstall -s $PWD/PHSS_30022.depot \*

SEP

Re: PHSS_30022 error

Ravinder Kaul — Fri, 21 May 2004 01:01:03 GMT

The patch may not be completely downloaded. Check the file size at the source and destination.

Re: PHSS_30022 error

Achilles_2 — Fri, 21 May 2004 02:17:56 GMT

I have tried all your suggestions, but it is still failed.

Re: PHSS_30022 error

Joseph Loo — Fri, 21 May 2004 03:08:52 GMT

hi,

please be specified about what actually failed. the swinstall, ftp download or the execution of the script, create_depot_hp-ux_11, etc.

regards.

Re: PHSS_30022 error

wayne_89 — Wed, 09 Jun 2004 21:41:38 GMT

The PHSS_30022 is for 11.22

Does anyone know which equal patch for 11.23?

Thanks