https://community.hpe.com/t5/operating-system-hp-ux/configuration-question/m-p/2593192#M883579 You should bring your sytem down first, especially since it's the "core IO" card. You'll need the proper scsi cable and terminator. Boot the system, do an ioscan. If the device is claimed and the drivers are set, then you are ready to rock. If not, you'll need to go into sam and add the device drivers. Thu, 11 Oct 2001 14:05:52 GMT harry d brown jr 2001-10-11T14:05:52Z https://community.hpe.com/t5/operating-system-hp-ux/configuration-question/m-p/2593191#M883578 I would like to add an exabyte 8205xl 8mm tape drive to my G70 running 11.x. I am wondering if I can use my SCSI port on my scsi/console/aux card, and if so, how do I do this. What do i need to do without panic'ing the box. <BR /><BR />Please advise?<BR /><BR />Vito Thu, 11 Oct 2001 13:30:56 GMT https://community.hpe.com/t5/operating-system-hp-ux/configuration-question/m-p/2593191#M883578 Vito Sarducci 2001-10-11T13:30:56Z https://community.hpe.com/t5/operating-system-hp-ux/configuration-question/m-p/2593192#M883579 You should bring your sytem down first, especially since it's the "core IO" card. You'll need the proper scsi cable and terminator. Boot the system, do an ioscan. If the device is claimed and the drivers are set, then you are ready to rock. If not, you'll need to go into sam and add the device drivers. Thu, 11 Oct 2001 14:05:52 GMT https://community.hpe.com/t5/operating-system-hp-ux/configuration-question/m-p/2593192#M883579 harry d brown jr 2001-10-11T14:05:52Z