https://community.hpe.com/t5/operating-system-hp-ux/openssh2-error/m-p/2593587#M883695 I would guess that you have X tunnelling enabled on your SSH client, and the server is trying to make an X connection to your computer. Try forcing swinstall/sam to run in character mode (it should default anyway after an error.... dunno why it wouldn't), or ensuring that you have an X server running on your PC, and the DISPLAY is set correctly in your shell (DISPLAY=<PC ip="" address="">:0.0;export DISPLAY - eg DISPLAY=192.168.1.1:0.0...)<BR /><BR />Cheers,<BR />James</PC> Fri, 12 Oct 2001 08:52:29 GMT James Beamish-White 2001-10-12T08:52:29Z https://community.hpe.com/t5/operating-system-hp-ux/openssh2-error/m-p/2593586#M883694 Dear All,<BR /><BR />HP-UX 10.20, Openssh2, 9000 D330. SSH client SecureNetTerm 5.3.2.<BR /><BR />When I try to run swinstall/sam/stm... through ssh, i got bellow error message:<BR />X connection to 10.10.20.192:10.0 broken (explicit kill or server shutdown).<BR /><BR />I remember that swinstall/sam/stm can run successfully b4, don't know why fail now.<BR /><BR />Appreciate for any help.<BR />TIA.<BR /><BR />A.Y. from SPINDEX SHANGHAI Thu, 11 Oct 2001 23:51:23 GMT https://community.hpe.com/t5/operating-system-hp-ux/openssh2-error/m-p/2593586#M883694 xuzuoyin 2001-10-11T23:51:23Z https://community.hpe.com/t5/operating-system-hp-ux/openssh2-error/m-p/2593587#M883695 I would guess that you have X tunnelling enabled on your SSH client, and the server is trying to make an X connection to your computer. Try forcing swinstall/sam to run in character mode (it should default anyway after an error.... dunno why it wouldn't), or ensuring that you have an X server running on your PC, and the DISPLAY is set correctly in your shell (DISPLAY=<PC ip="" address="">:0.0;export DISPLAY - eg DISPLAY=192.168.1.1:0.0...)<BR /><BR />Cheers,<BR />James</PC> Fri, 12 Oct 2001 08:52:29 GMT https://community.hpe.com/t5/operating-system-hp-ux/openssh2-error/m-p/2593587#M883695 James Beamish-White 2001-10-12T08:52:29Z