topic Re: Active remote port in Operating System - HP-UX

Active remote port

Achilles_2 — Thu, 03 Jun 2004 03:42:33 GMT

Hi all,

I have an question about the Remote port. There are some controls and LED indicators at the front of the A400 server. How do I activiate the remote port?

Thanks
Alex

Re: Active remote port

G. Vrijhoeven — Thu, 03 Jun 2004 03:46:52 GMT

Hi Alex,

Connect a console ( serial ) to the A400 and will get you in the Service processor. This can be configured ( lc )so you are able to access the console over the network.

info:

http://docs.hp.com/cgi-bin/fsearch/framedisplay?top=/hpux/onlinedocs/A5191-96018/A5191-96018_top.html&con=/hpux/onlinedocs/A5191-96018/00/00/21-con.html&toc=/hpux/onlinedocs/A5191-96018/00/00/21-toc.html&searchterms=gsp&queryid=20040603-024633

Regards,

Gideon

Re: Active remote port

Manish Srivastava — Thu, 03 Jun 2004 03:51:05 GMT

Hi Alex,

The following link may help you:

http://docs.hp.com//hpux/onlinedocs/hw/class_a/a400/content/00/02/QK/idd/23.html

manish.

Re: Active remote port

Jose Mosquera — Thu, 03 Jun 2004 04:00:11 GMT

Hi,

From your console your key is Ctrl-B. Also I provide you a complete GSP's guide. Pls find it attached.

Rgds.

Re: Active remote port

Mohanasundaram_1 — Fri, 04 Jun 2004 01:08:06 GMT

Hi Alex,

If you want to enable the remote console, at GSP you need to give "ER"

gsp>er

this will enable the remote console port and the corresponding amber LED at the front will be lit.

Beware, this remote console is meant exclusively for HP response center engineers to login to your system. You need to connect a modem and a telephone line for the same.

If you want other users to connect via modem, you need to have mux cards installed in your system.

Hope it helps.

Cheers,
Mohan.