https://community.hpe.com/t5/operating-system-hp-ux/changing-model-script-for-okidata321/m-p/2830164#M88689 You might be able to change the interface file. /etc/lp/interface/????? Mon, 21 Oct 2002 17:40:22 GMT Ken Hubnik_2 2002-10-21T17:40:22Z https://community.hpe.com/t5/operating-system-hp-ux/changing-model-script-for-okidata321/m-p/2830163#M88688 We set the printer to IBM format and also configure the Okidata 321 for: <BR />auto FF on, <BR />auto CR on <BR />We then used the dumplot - no CR option to start. <BR />We can print with the dumplot_printer. It is currently printing with 6lpi/10cpi. We now need to switch it to 8lpi/10cpi without losing the original printer (need another model). We have tried net_genericprinter with lp command: lp -s -o`nb 10 lpi8 tl66`. This also does not work. Also tried uncondensed version of the above command. <BR /><BR />Any ideas on switching lpi/cpi for new model? <BR /><BR />Thanks - Chris <BR /> Mon, 21 Oct 2002 17:21:34 GMT https://community.hpe.com/t5/operating-system-hp-ux/changing-model-script-for-okidata321/m-p/2830163#M88688 Christopher Hildrum_1 2002-10-21T17:21:34Z https://community.hpe.com/t5/operating-system-hp-ux/changing-model-script-for-okidata321/m-p/2830164#M88689 You might be able to change the interface file. /etc/lp/interface/????? Mon, 21 Oct 2002 17:40:22 GMT https://community.hpe.com/t5/operating-system-hp-ux/changing-model-script-for-okidata321/m-p/2830164#M88689 Ken Hubnik_2 2002-10-21T17:40:22Z