topic Re: entria workstation gives "Not Owner" message boot failed in Operating System - HP-UX

entria workstation gives "Not Owner" message boot failed

David S. Bell — Fri, 16 Mar 2001 19:21:45 GMT

I just loaded the enware 7.10 software to be able to use my old Xterms. The first problem I had was with the NIC failing with and auto 10/100 switch. I was able to DHCP but then got the message that the gateway was not responding. I got by this by setting the port to be 10 and adding a hub between the entria and the switch. Now when I try to boot It does the DHCP then I get "not owner" boot failed.

Re: entria workstation gives "Not Owner" message boot failed

Patrick Wallek — Sat, 17 Mar 2001 03:09:47 GMT

I couldn't find your exact error message, but here are a couple of links from the TKB that may help you.

http://us-support3.external.hp.com/cki/bin/doc.pl/sid=24fc738008d5ba6429/screen=ckiDisplayDocument?docId=200000048049429

http://us-support3.external.hp.com/cki/bin/doc.pl/sid=24fc738008d5ba6429/screen=ckiDisplayDocument?docId=200000053354634

Re: entria workstation gives "Not Owner" message boot failed

Bill McNAMARA_1 — Mon, 19 Mar 2001 12:14:25 GMT

make sure spanning tree option is off on the switch.. wouldn't be a cisco/procurve by any chance?

Bill

Re: entria workstation gives "Not Owner" message boot failed

Alex Glennie — Mon, 19 Mar 2001 13:22:31 GMT

Or ......

upgrade to 7.11 and install the latest patch ?

Patch Name: PHSS_21691
Patch Description: s700_800 10.x HP ENWARE B.07.11.00PL02 06/2000
Creation Date: 00/06/01Post Date: 00/07/03Hardware Platforms - OS Releases:
s700: 10.01 10.10 10.20 10.30 s800: 10.01 10.10 10.20 10.30Products:
ENWARE B.07.11Filesets: ENWARE.HPXT-SUPPL ENWARE.HPXT-ENVIZE ENWARE.HPXT-TOKN
ENWARE.HPXT-VG ENWARE.HPXT-AUDIO ENWARE.HPXT-NFS
ENWARE.HPXT-FLOPPY ENWARE.HPXT-ENTRIA ENWARE.HPXT-XDMAutomatic Reboot?: No
Status: General ReleaseCritical: No
Path Name: /hp-ux_patches/s700_800/10.X/PHSS_21691Symptoms: PHSS_21691:
1. PANap19385 - B.07.11 always switches to the alternate file server
When both primary and alternate file-servers are
configured, the XTerm always downloads its code from
the alternate file server. 2. PANap19485 - Envizex and 10/100 networking
When booting through an auto-sensing 10/100 switch
(HP ProCurve 10/100 J3295A), the Envizex could no longer
download the binaries/config. from the server. Messages are displayed :
"No cable" "No etherTwist hub detected"
3. PANap19539 - Envizex connected to auto-sensing 10-100
switch fails booting
When booting through an auto-sensing 10/100 switch
(Allied Telesyn AT-FS708), the Envizex fails.

and I'd still alter the spanning tree option if applcable.